Scotsman Prodigy Elite MC0330 handleiding

Niet gecategoriseerd

Scotsman

22 pagina's

PDF beschikbaar

Handleiding

MC0322 through MC1030

Air and Water Cooled User Manual

June 2022

Page 18

Ice machine cleaner contains acids.

Acids can cause burns.

If concentrated cleaner comes in

contact with skin, ush with water. If

swallowed, do NOT induce vomiting.

Give large amounts of water or milk.

Call Physician immediately. Keep

out of the reach of children.

Cleaning, Sanitation and Maintenance

This ice system requires three types of maintenance:

• Remove the build up of mineral scale from the ice machine’s water system and sensors.

• Sanitize the ice machine’s water system and the ice storage bin or dispenser.

• Clean or replace the air lter and clean the air cooled condenser (air cooled models only).

It is the User’s responsibility to keep the ice machine and ice storage bin in a sanitary condition. Without

human intervention, sanitation will not be maintained. Ice machines also require occasional cleaning of their

water systems with a specically designed chemical. This chemical dissolves mineral build up that forms during

the ice making process.

The ice machine’s water system should be cleaned and sanitized a minimum of twice per year. Sanitize the

ice storage bin as frequently as local health codes require, and every time the ice machine is cleaned and

sanitized.

Preparing to Clean:

1. Remove the front panel.

2. Remove the evaporator cover.

Scale Removal:

3. Push and release the Clean button. The yellow

Clean light will blink and the display will show C.

The machine will harvest any ice, drain the reservoir

and begin to rell it.

4. Observe code display, when it blinks the characters

“A d 1” immediately go to the next step.

5. Pour the below specied amount Scotsman Clear

1 ice machine scale remover into the reservoir. The

unit will circulate the scale remover, then drain and

ush it. This will take 35 minutes, then the machine

will stop and the display will show O.

Note: Using chemicals or dilution ratios other than

what is specied will damage the ice machine and

signicantly a󰀨ect the performance and life of the ice

machine.

Clean internal parts:

6. Mix a cleaning solution of 6oz of Scotsman Clear

1 scale remover with 9 cups (72oz) of 105-115° F

potable water.

7. In a separate bucket, mix a sanitizing solution of 1.6

oz of Nu-Calgon IMS Sanitizer with 1 gallon (128

oz) of 105-115 degree F. potable water.

8. Remove air lter(s)(if applicable), water level sensor

and housing, water distributor(s), curtain(s), ice

thickness sensor, and splash panel for additional

cleaning.

9. Soak and scrub each part (including the

evaporator cover!) using the previously prepared

solution of Scotsman Clear 1 scale remover and a

nylon brush, and then rinse with water. Save scale

remover solution.

10. Soak and scrub each part using the previously

prepared sanitizing solution. No rinse needed. Save

sanitizing solution.

11. Using a non-metallic scouring pad, scrub spillway

with sanitizer to remove any material buildup and

debris.

12. Reinstall ice thickness sensor, curtain(s), splash

panel, water distributor(s), and water level sensor in

their original positions. Be sure water level sensor

and ice thickness sensor are completely dry.

MC0322, MC0330 8 ounces

MC0522, MC0530 or MC0630 10 ounces

MC0722, MC0830 or MC1030 12 ounces

Bekijk gratis de handleiding van Scotsman Prodigy Elite MC0330, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.