Scotsman HID540AWX handleiding
Handleiding
Je bekijkt pagina 13 van 24
HID312AWX, HID525AWX and HID540AWX
Installation and User’s Manual
January 2025
Page 10
Initial Start Up
Final check list:
1. Is the icemaker-dispenser installed indoors, in a
location where the air and water temperatures
are controlled, and where they do not go beyond
design limitations?
2. Is there an electrical disconnect (switch or
plug as required) within sight of the installed
machine? Is the machine on a separate circuit?
Has the voltage been checked and compared to
nameplate requirements?
3. Have all of the plumbing connections been made
and checked for leaks?
4. Has the machine been leveled?
5. Is there a minimum of 6 inches of clearance at the
left and right sides of an air cooled machine?
6. Is there a minimum of 6 inches of clearance at the
top of the machine for service?
7. Is there a water shut o valve installed near the
machine?
Start Up
1. Remove upper front panel
2. Open the water hand valve, observe that water
enters the water reservoir, lls and then shuts o.
Check for leaks. Repair any leaks before going
any further.
3. Switch electrical supply on. Lights on controller
will ash and then the power light will remain on.
The code display will show O.
4. Push and release the ON/OFF button. The
machine will start the ice making process. The
code display will show F. Air cooled models will
discharge warm air out the right side, water cooled
models will discharge warm (about 110
o
F.) water
out of the condenser drain.
5. Soon ice will begin to fall into the dispensing bin.
Check ice dispensing by holding a container in
front of the Touch Free ice sensor (just below the
ice delivery spout). Ice should ow from the spout
when a container is present, and stop dispensing
when the container is removed.
6. Check water dispensing by holding a container in
front of the Touch Free water sensor. Water will
ow when a container is present and stop when it
is removed.
7. Push the ON/OFF button to switch machine o.
8. Unplug or disconnect electrical power.
9. Remove the top panel and the top of the ice
storage bin. Scoop out any ice in the bin and
sanitize the interior of the ice storage bin by wiping
it with a locally approved sanitizer or a mixture of
1 ounce of household bleach to 2 gallons of water.
Allow to air dry.
10. Reconnect electrical power.
11. Push the ON/OFF button to switch machine on.
12. Replace all covers and panels.
13. Give the owner/user the user manual. Instruct
them in the operation and maintenance
requirements of the unit. Make sure they know
who to call for service.
14. Fill out the Customer Evaluation and Warranty
Registration form, and mail it in to Scotsman or
register the unit at Scotsman’s website (www.
scotsman-ice.com).
ON / OFF
Bekijk gratis de handleiding van Scotsman HID540AWX, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Scotsman |
| Model | HID540AWX |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2772 MB |
