Schumacher SL474 handleiding
Handleiding
Je bekijkt pagina 7 van 92
- 7 - EN
LED
display
Buzzer
warning
LED and buzzer
description
Description / Reason
2 Red LEDs solid
Rapid beeping
Reverse polarity protection
The clamp polarity has not been respected.
TO DO: Connect the clamps correctly (see step 4.1-
point 2 - Connection to the battery).
No lights/LED
No beep
Battery exhausted or poor connection
(1) the smart cable is not properly connected
to the booster OR
(2) The jump starter battery is over discharged.
TO DO: First check the connection between smart
cable and booster. Then check the battery status
ofthe booster.
1 Red LED solid
Rapid beeping
Shot circuit protection
(1) there is a short circuit on the clamps OR
(2) There is a short circuit on the car battery.
TO DO: First check the clamp connection.
Then check the car battery and replace it.
Red and green
LED solid
Beeps once per
second
Temperature protection
The booster has automatically switched
totemperature protection mode.
TO DO: Let the booster cool down before
considering any new attempt.
Electrical products should not be discarded with household products. Electrical
products used must be collected separately and disposed of at collection points
provided for this purpose. Talk with your local authorities or dealer for advice
onrecycling.
Bekijk gratis de handleiding van Schumacher SL474, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Schumacher |
| Model | SL474 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 12713 MB |
