Scheppach WIG2000-Multi handleiding
Handleiding
Je bekijkt pagina 30 van 288
www.scheppach.com
30
|
GB
TIG - welding
O-load voltage U
0
14 V~
Working voltage U
2
10.6 - 18 V~
Welding current l
2
15 - 200 A
Highest mains current rated
value
max
28,4 A
Eective value of the largest
mains current
e
14,2 A
Energy eciency of the power
source
80%
Power consumption in idle
state
14W
Duty cycle X
25% 2000 A
60% 115 A
100% 90 A
Technical changes reserved!
7. Unpacking
• Open the packaging and carefully remove the de-
vice.
• Remove the packaging material, as well as the pack-
aging and transport safety devices (if present).
• Check whether the scope of delivery is complete.
• Check the device and accessory parts for transport
damage. In the event of complaints the carrier must
be informed immediately. Later claims will not be
recognised.
• If possible, keep the packaging until the expiry of the
warranty period.
• Familiarise yourself with the product by means of the
operating instructions before using for the rst time.
• With accessories as well as wearing parts and re-
placement parts use only original parts. Replace-
ment parts can be obtained from your dealer.
• When ordering please provide our article number as
well as type and year of manufacture for your equip-
ment.
m WARNING!
The device and the packaging material are not
children’s toys! Do not let children play with plas-
tic bags, lms or small parts! There is a danger of
choking or suocating!
• Using an electromagnetic lter that reduces electro-
magnetic interference.
General safety measures
The user is responsible for installing and using the de-
vice properly in accordance with the instructions of the
manufacturer. If electromagnetic interference is iden-
tified, it is the responsibility of the user to eliminate it
using the technical aids mentioned above under point
“Important note on the power connection”.
Warning! This power tool generates an electromag-
netic field during operation. This field can impair active
or passive medical implants under certain conditions.
In order to prevent the risk of serious or deadly injuries,
we recommend that persons with medical implants
consult with their physician and the manufacturer of
the medical implant prior to operating the power tool.
6. Technical data
Dimensions L x W x H 360 x 146 x 235 mm
Mains voltage U
1
230V~ / 50/60 Hz
Power consumption P1 9,6 KVA
Protection category H
Insulation class IP 21S
Type of cooling AF
Weight 7.8 kg
MMA welding
O-load voltage U
0
95,5 V~
Working voltage U
2
20.6 - 28 V~
Welding current l
2
15 - 200 A
Highest mains current rated
value
max
41,2 A
Eective value of the largest
mains current
e
15,9 A
Energy eciency of the power
source
82%
Duty cycle X
15% 200 A
60% 100 A
100% 80 A
Bekijk gratis de handleiding van Scheppach WIG2000-Multi, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Scheppach |
| Model | WIG2000-Multi |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 39618 MB |
