Scheppach TS30 handleiding
Handleiding
Je bekijkt pagina 36 van 56
www.scheppach.com
36
|
GB
16. Troubleshooting
The following table shows fault symptoms and describes remedial measures in the event of your machine failing to
work properly. If you cannot localise and rectify the problem with this, please contact your service workshop.
Fault Possible cause Remedy
Saw blade is loose
after the motor is
switched off
Fixing nut not tight enough Tighten xing nut, right-hand thread
Motor does not start
Mains fuse blown Check mains fuse
Extension cable defective Replace the extension cable
Connection to the motor or
switch not OK
Have this checked by an electrician
Motor or switch faulty Have this checked by an electrician
Incorrect motor rota-
tional direction
Capacitor defective Have this checked by an electrician
Incorrect connection Have an electrician transpose the wall plug poles
Motor not supplying
power, fuse tripping
Cross section of the exten-
sion cable insufcient
See Electrical connection
Overload due to blunt saw
blade
Replacing the saw blade
Burnt areas on the
cutting surface
Blunt saw blade Sharpen, replace saw blade
Incorrect saw blade Replace saw blade
Bekijk gratis de handleiding van Scheppach TS30, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Scheppach |
| Model | TS30 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 8355 MB |
