Scheppach TPX710 handleiding
Handleiding
Je bekijkt pagina 31 van 112
www.scheppach.com / service@scheppach.com / +(49)-08223-4002-99 / +(49)-08223-4002-58
GB
|
31
13. Troubleshooting
Fault Possible cause Remedy
Machine does not
start
• Supply voltage not on
• On/O switch faulty
• Worn carbon brushes
• Motor faulty
• Power cable damaged
• Check the socket or the electricity supply;
if required, arrange repair by an authorised
electrician.
• Contact the service centre
• Contact the service centre
• Contact the service centre
• Check the extension lead and have it re-
placed, if required.
Machine works with
interruptions
• Power cable damaged
• Internal connections are loose
• On/O switch faulty
• Check the extension lead and have it re-
placed, if required.
• Contact the service centre
• Contact the service centre
Poor cutting quality • Blades are blunt. • Have the blades sharpened or the knife bar
replaced.
Motor is running but
the
gears are not
engaging
• The power unit is jammed by a thick
branch or other objects.
• Turn the hedge trimmer o immediately,
disconnect the electricity supply and remove
the blockage.
Pole saw does not
saw, it plucks or
vibrates.
• Chain tension too high.
• Chain blunt.
• Chain attached incorrectly.
• Chain worn.
• Check and reset chain tension.
• Have the chain sharpened or replace it.
• Re-attach the chain.
• Replace the chain.
11. Storage
Storage
• Disconnect the hedge trimmer from the electricity
supply when it is not being used.
• Oil the blades to prevent rust
• Store the device in a dry place beyond the reach
of children.
• When the device is not being used, store it so it
cannot be started by unauthorised persons.
WARNING!
Do not store the device without protection out-
side or in a damp environment.
12. Disposal and recycling
The equipment is supplied in packaging to prevent it
from being damaged in transit. The raw materials in
this packaging can be reused or recycled. The equip-
ment and its accessories are made of various types
of material, such as metal and plastic. Defective
components must be disposed of as special waste.
Ask your dealer or your local council.
Old devices must not be disposed of with house-
hold waste!
This symbol indicates that this product must
not be disposed of together with domestic
waste in compliance with the Directive
(2012/19/EU) pertaining to waste electrical
and electronic equipment (WEEE). This product must
be disposed of at a designated collection point. This
can occur, for example, by handing it in at an author-
ised collecting point for the recycling of waste elec-
trical and electronic equipment. Improper handling
of waste equipment may have negative consequenc-
es for the environment and human health due to po-
tentially hazardous substances that are often con-
tained in electrical and electronic equipment. By
properly disposing of this product, you are also con-
tributing to the eective use of natural resources.
You can obtain information on collection points for
waste equipment from your municipal administration,
public waste disposal authority, an authorised body
for the disposal of waste electrical and electronic
equipment or your waste disposal company.
Bekijk gratis de handleiding van Scheppach TPX710, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Scheppach |
| Model | TPX710 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 17762 MB |
