Scheppach SC38 handleiding
Handleiding
Je bekijkt pagina 24 van 88
www.scheppach.com
24
|
GB
• Only use approved extension cables of the type
H05VV-F or H05RN-F with a maximum length of
75 m and which have been approved for open-air
use. The stranded cord diameter of the extension
cable must be at least 2.5 mm
2
. Always unreel a
cable drum to its full length so that the entire cable
can be checked for damage.
• Use the envisaged cable suspension when attach-
ing an extension cable.
• Never pull the cable to disconnect the plug from the
socket. Protect the cable from heat, oil and sharp
edges.
• If the connecting cable is damaged, rst disconnect
the extension cable from the socket. You can then
disconnect the connecting cable of the equipment.
• If the power cable for this equipment is damaged, it
must be replaced by the manufacturer, a customer
service agent of the same or a similarly qualied
person in order to prevent hazards.
6. Residual risks
Even if you use this electric power tool in accord-
ance with instructions, certain residual risks can-
not be rules out. The following hazards may arise
in connection with the equipment’s construction
and layout:
1 Damage to hearing if no suitable ear protection
is used.
2 Health damage caused by hand-arm vibrations if
the equipment is used over a prolonged period or
is not properly guided and maintained.
m Warning!
This electric tool generates an electromagnetic eld
during operation. This eld can impair active or passive
medical implants under certain conditions. In order to
prevent the risk of serious or deadly injuries, we recom-
mend that persons with medical implants consult with
their physician and the manufacturer of the medical
implant prior to operating the electric tool.
7. Technical data
Main voltage 230-240V~ 50Hz
Power Input 1600W
Working width 380 mm
Number of blades 16
• Only use spare parts and accessories that have
been supplied or recommended by the manufactur-
er. The use of alien parts results in the immediate
loss of all guarantee claims. Ensure that all nuts,
bolts and screws are rmly tightened and that the
implement is in a safe working state.
• Never try to repair the implement yourself, other than
you have been trained accordingly. All work that has
not been listed in these Instructions must only be car-
ried out by authorised servicing agencies.
• Treat the implement with the greatest care. Always
keep the tool clean for better and safer work. Follow
the maintenance instructions.
• Never overload the implement. Always work within
the specied capacity range. Do not use low-power
machines for heavy-duty work. Do not operate the
implement for purposes for which it is not intended.
Electrical safety:
m Caution!
The following states how to avoid accidents and inju-
ries due to electric shock:
• Before each use, carry out a visual inspection of the
power and extension cables for signs of damage
or ageing.
• If the power cable for this equipment is damaged, it
must be replaced by the manufacturer, a customer
service agent of the same or a similarly qualied
person in order to prevent hazards.
• Keep the power cable well away from the cutting
tools. Should the power cable become damaged
during work, then instantly disconnect the power
cable from the mains.
Do not touch the power cable before it has been
disconnected from the mains.
• Keep the extension cables away from the teeth. The
teeth may damage the cables and result in contact
with live parts.
• Check that the mains voltage is the same as indi-
cated on the rating plate.
• Wherever possible connect the implement to a pow-
er socket with a residual- current circuit breaker that
has a rated current of not more than 30 mA.
• Avoid body contact with earthed parts (e.g. metal
fences, metal posts).
Bekijk gratis de handleiding van Scheppach SC38, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Scheppach |
| Model | SC38 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 12653 MB |
