Scheppach SBP250 handleiding
Handleiding
Je bekijkt pagina 29 van 100
www.scheppach.com / service@scheppach.com / +(49)-08223-4002-99 / +(49)-08223-4002-58
GB
|
29
13. Troubleshooting
The table below contains a list of error symptoms and explains what you can do to solve the
problem if your tool fails to work properly. If the problem persists after working through the
list, please contact your nearest service workshop.
Problem Possible Cause Remedy
Pump does not start
Mains voltage is not applied
Check mains voltage
Float switch (3) does not
switch
Bring oat switch into higher posi-
tion
Pumps has no dis-
charge
Pump capacity reduces
heavily soiled and abrasive
water admixtures
Clean pumps
Pump does not
switch o
Float switch (3) cannot drop
Set up pumps correctly on the pit
base
Flow rate insucient
Reduces pump perfor-
mance, through severely
contaminated water and
additions in the water which
produce a grinding eect
Clean pumps
Pump switches o
after a short period
Motor contactor disconnects
the pumps because of water
pollution that is too severe.
Pull out power plug and clean the
pump as well as shaft
Water temperature too high,
motor contactor breaks
Note maximum water temperature
of 35°C!
Bekijk gratis de handleiding van Scheppach SBP250, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Scheppach |
| Model | SBP250 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 11315 MB |
