Scheppach SBC4.5A handleiding
Handleiding
Je bekijkt pagina 23 van 296
15 Warranty conditions - Scheppach 20V IXES series
Revision date 25/04/2024
Dear customer,
our products are subject to strict quality checks. However, if a product does not function perfectly, we
deeply regret this and ask that you contact our customer service at the address specified below. We
will also be glad to assist you by telephone via the service number. The following information is in-
tended to help you to process and settle your claim without any problems.
For the assertion of warranty claims, the following applies:
1. The warranty conditions govern our additional manufacturer warranty services for purchasers
(private end consumers) of new products. The statutory warranty claims are not affected by this
warranty. This is the responsibility of the dealer who you purchased the product from.
2. The manufacturer's warranty only covers defects in a new product purchased by you that are
due to a material or manufacturing defect. If material or manufacturing defects occur during the
warranty period, the manufacturer as guarantor shall provide one of the following services of its
choice under this warranty:
– Free repair of the goods
– Free replacement of the goods with an item of equal value (if necessary also replacement
with a successor model if the original goods are no longer available).
Replaced products or parts shall become our property. Please note that our products were not
designed for commercial, trade or professional use. A warranty claim is therefore not valid if the
product has been used in commercial, trade or industrial operations within the warranty period or
has been subjected to equivalent stress.
3. The following are excluded from our warranty services:
– Damage to the product which was caused by non-observance of the assembly instructions,
improper installation, non-observance of the operating instructions (e.g. connection to an in-
correct mains voltage or type of current) or the maintenance and safety regulations or use of
the product in unsuitable environmental conditions as well as by insufficient care and mainte-
nance.
– Damage to the product caused by misuse or improper application (such as overloading the
product or using non-approved tools and accessories), penetration of foreign bodies into the
product (such as sand, stones or dust), transport damage, use of force or external influences
(such as damage caused if dropped).
– Damage to the product or parts of the product which is due to intentional, normal (operation-
al) or other natural wear as well as damage and/or wearing of wear parts.
– Defects in the product which have been caused by the use of accessories, expansions or
spare parts that are not original parts or are not used as intended.
– Products on which changes or modifications have been made.
– Minor deviations from the target characteristics which are irrelevant for the value and usabili-
ty of the product.
– Products on which unauthorised repairs have been carried out, in particular by an unautho-
rised third party.
– If the marking on the product or the identification information of the product (machine label)
is missing or illegible.
– Products that are very dirty and are therefore refused by the service personnel.
– Claims for damages and consequential damages are generally excluded from this warranty.
GB | 23www.scheppach.com
Bekijk gratis de handleiding van Scheppach SBC4.5A, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Scheppach |
| Model | SBC4.5A |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 24317 MB |
