Scheppach PX-GB-1 handleiding
Handleiding
Je bekijkt pagina 10 van 20
w ww.practixx.com
10
|
GB
5. Screw the two cross struts (3) to the armrests as
shown in Figure 3.
• Use the Phillips screwdriver (4) supplied for this
purpose.
6. Make sure that all screws are tightened and the
bench is stable.
7. If necessary, retighten all screws and nuts.
9. Cleaning
• This product is pre-treated with water-based wood
stain to make the surface durable enough for outdoor
use. To ensure a long service life, the furniture should
be cleaned regularly, left unprotected outdoors for no
longer than necessary and re-varnished at regular
intervals.
• Clean with a damp cloth and mild soap solution. Wipe
dry with a soft, clean cloth.
10. Storage
This product is pre-treated with water-based wood stain
to make the surface durable enough for outdoor use. To
ensure a long service life, the product should be cleaned
regularly, should not be left unprotected outdoors for
longer than necessary and should be reglazed at regular
intervals.
Clean and dry the product carefully before storing it after
the summer season. Store summer furniture indoors in a
cool and dry place if possible.
If stored outdoors, stow under a roof and with a protec-
tive cover if possible. Furniture that is stored unprotected
from rain or snow should be carefully protected with a
water-repellent cover and, if possible, positioned at an
angle to allow water to run o better.
Dry the furniture after rain or snowfall - especially the at
surfaces. Ensure air circulation to prevent moisture and
mould growth.
11. Maintenance
PLEASE NOTE!
To maintain the stability of the furniture, all screws
should be tightened at least once a season.
Regular treatment with wood stain - e.g. once a year -
freshens up wooden summer furniture and increases its
durability.
6. Technical data
• Dimensions: approx. 122 x 80 x 60 cm (L x H x D)
• Maximum load: 160 kg
7. Unpacking
• Open the packaging and carefully remove the prod-
uct.
• Remove the packaging material, as well as the pack-
aging and transport safety devices (if present).
• Check whether the scope of delivery is complete.
• Check the product and accessory parts for transport
damage. In the event of complaints the carrier must
be informed immediately. Later claims will not be rec-
ognised.
• If possible, keep the packaging until the expiry of the
warranty period.
• Familiarise yourself with the product by means of the
operating manual before using for the rst time.
m WARNING!
The product and the packaging material are not
children’s toys! Do not let children play with plas-
tic bags, lms or small parts! There is a danger of
choking or suocating!
8. Layout
m Attention!
Always assemble the product completely before
use!
It is helpful to involve a second person for the in-
stallation.
Ensure that all parts are present according to the parts
list before starting assembly.
1. Lay out all parts on a at surface.
2. Place both armrests (2 & 2a) upside down so that
the holes are facing upwards as shown.
3. Align the wooden slats (1) along the holes in the
armrests (2 & 2a).
4. Screw the wooden slats (1) together on both sides
with a screw (1a), a washer (1c) and a nut (1b) as
shown in Figure 3.
• Use the Phillips screwdriver (4) supplied for this
purpose.
• Use the spanner (5) to tighten the nuts (1b).
Bekijk gratis de handleiding van Scheppach PX-GB-1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Scheppach |
| Model | PX-GB-1 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1896 MB |
