Scheppach MP46-40Li handleiding
Handleiding
Je bekijkt pagina 28 van 48
www.scheppach.com
28
|
GB
9. Maintenance and care
m WARNING!
Remove the battery from the machine before any
maintenance and repair work on the lawn mower.
The cutting tools are sharp! Wear safety gloves.
Lawn mower
m WARNING!
Regularly check the machine before starting work.
Damaged parts must be repaired or replaced by an
authorised service centre before you start work with
the machine. Only ever use original accessories and
spare parts.
If possible, always clean the machine straight after
mowing.
• Remove the battery.
• Remove the grass box.
• After every mowing, clean the lawn mower with a
hand brush.
• Carefully remove grass residue from the cutting ar-
ea. Loosen stuck grass residue with a wooden stick.
• Keep the ventilation slots clean and free from dust.
• Never use water to clean or spray the machine.
Clean the motor casing with a damp cloth and nev-
er use detergents or solvents!
This may damage the machine‘s plastic parts. Care-
fully dry the motor casing afterwards.
• Check the condition of the blades.
Grass box
• You can use a hose to thoroughly clean the grass box.
Removing/sharpening the cutter bar
If the blades‘ cutting performance decreases, you can
remove the blades and have them sharpened by a
certied specialist.
During assembly, thoroughly clean the area of contact
of the ange and the blades.
Tighten the clamp screw rmly, Fig. 7.
Spare parts must comply with requirements speci-
ed by the manufacturer. Therefore, only ever use
original spare parts or spare parts approved by the
manufacturer.
Repairs
Check the machine for damage. Have repairs carried
out exclusively by a service centre authorised by the
manufacturer.
Service information
Please note that the following parts of this product are
subject to normal or natural wear and that the following
parts are therefore also required for use as consuma-
bles.
Wear parts*: knife, battery
* Not necessarily included in the scope of delivery!
Remember that the blade will continue to rotate for a
few seconds after the engine is switched o. Never
try to stop the blade.
Regularly check that the blade is properly fastened,
in good condition and sharpened. Sharpen or re-
place it if this is not the case. If the moving blade
strikes an object, stop the mower and wait for the
blade to come to a complete stop. Then check the
condition of the blade and the blade holder. If it is
damaged, it must be replaced.
Emptying the catch basket
The catch basket (4) has a level indicator (Fig. 8). This
is opened by the air ow generated by the mower dur-
ing operation. If the ap (Fig. 8) closes during mow-
ing, the catch basket (4) is full and should be emptied.
The holes under the ap must always be clean and
passable for the level indicator to function properly.
As soon as grass residues are left lying behind on
the ground during mowing, the catch basket must be
emptied.
m WARNING
Before removing the catch basket, stop the engine
and wait for the cutting tool to come to a standstill.
To remove the catch basket (4), lift the discharge ap
(9) with one hand and remove the catch basket (4) by
the carrying handle with the other hand (Fig. 9). In
accordance with the safety regulations, the discharge
ap (9) closes when the catch basket is unhooked and
closes the rear discharge opening.
If grass remains in the opening, it is advisable to pull
the lawnmower back about 1m to make it easier to
start the engine. Do not remove cuttings in the mower
housing and on the working tool by hand or with your
feet, but with suitable aids, e.g. brush or hand brush.
To ensure good collection, the catch basket (4) and in
particular the air grille must be cleaned from the inside
after use. Only hook in the catch basket (4) when the
engine is switched o and the cutting tool is station-
ary. Lift the discharge ap (9) with one hand and hold
the catch basket (4) by the handle with the other hand
and hook it in from above. (Fig. 9)
After mowing
• Check all screws and nuts before the next use.
Tighten all loose screws.
• Empty the catch basket (4) before the next use.
• Make sure that the mower is not parked next to a
source of danger. Escaping gas can cause explo-
sions.
• Only original parts or parts approved by the manu-
facturer may be used for repairs (see address on
guarantee certicate).
• In case of longer idle periods of the mower, empty
the petrol tank with a petrol suction pump.
• maintain the device
Bekijk gratis de handleiding van Scheppach MP46-40Li, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Scheppach |
| Model | MP46-40Li |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 9478 MB |
