Scheppach HT460-18Li handleiding
Handleiding
Je bekijkt pagina 17 van 32
17GB
www.scheppach.com service@scheppach.com +(49)-08223-4002-99 +(49)-08223-4002-58
locked. When the switch is released, the motor must
turn off. If a switch is damaged, the tool must not be
used. Personal Protective Equipment and a properly
functioning device will lower the risk of injuries and
accidents.
Comply with noise protection and local stipulations.
Removing the blade guard:
1. Before turning on the device, remove the blade
guard (10) from the cutter bar (2).
Turning the device on and off
Find safe footing and hold the tool securely with both
hands and at a distance from your body. Before turn-
ing on the unit, make sure that the blades are not
touching anything.
Power on:
1. Ensure that the battery (9) has been inserted (see
“Removing/inserting the battery”).
2. Press the safety switch (4) on the front handle (5).
3. Activate the on/off switch (7).
Power off:
4. Release the safety switch (4) or on/off switch (7).
Working with the tool
During the cutting process, be careful not to touch
any objects such as wire fences or plant supports.
This can cause damage to the safety cutter bar.
• If the blade is jammed by a xed object, immedi-
ately turn off the tool and remove the battery. Then
remove the object.
• Avoid over-stressing the device whilst working.
Cutting techniques
• Cut out thick branches with loppers before using
the hedge trimmer.
• The double-sided safety cutter bar enables cutting
in both directions or from one side to the other us-
ing a pendulum movement.
• When cutting vertically, evenly move the hedge
trimmer forwards or up and down in an arching
movement.
• When cutting horizontally, move the battery-pow-
ered hedge trimmer in a sickle shape from the
edge of the hedge so that cut off branches can
fall to the ground.
• In order to cut long straight lines, we recommend
setting up a string line.
Cutting established hedges:
In order to prevent lower branches from losing their
foliage, we recommend cutting hedges in a trape-
zium shape. This corresponds with the natural plant
growth and lets hedges prosper ideally.
When cutting, only the new shoots are reduced. This
means the branches grow thickly and form visual
protection.
• Cut the sides of a hedge rst. For this, move the
Technical data
Nominal voltage 18 V
Cutting length 460 mm
Cut/min 1200
Weight 2,6 kg
Weight (without battery) 2kg
Noise and vibration
The noise and vibration values were developed us-
ing a standardised measuring process.
Sound pressure L
pA
80,7 dB(A)
Sound power L
wA
91,7 dB(A)
Uncertainty K
WA
3 dB(A)
Vibration A
hv
1,81 m/s²
Uncertainty K 1,5 m/s²
Wear ear-muffs.
The impact of noise can cause damage to hearing.
Reduce noise generation and vibration to a minimum!
• Use only equipment that is in perfect condition.
• Maintain and clean the equipment regularly.
• Adopt your way of working to the equipment.
• Do not overload the equipment.
• Have the equipment checked if necessary.
• Switch off the equipment when not in use.
• Wear gloves
Before starting the equipment
Unpack the device and check it for complete delivery
contents and transport damage.
NOTE
The batteries (optional; depending on the delivery
scope) are not fully charged on delivery. Before rst
use, fully charge the batteries. See charger instruc-
tion manual.
Removing / inserting the battery
1. To remove the battery from the appliance, press
the release button on the battery and pull out
the battery.
2. To insert the battery , place it on the guide track
and push it back into the appliance. It will audi-
bly snap in.
Use
Operation
Wear appropriate clothing and safety gloves when
working with this tool. Wear eye and hearing protec-
tion. Before each use, ensure that the unit is work-
ing properly.
The on/off switch and the safety switch must not be
Bekijk gratis de handleiding van Scheppach HT460-18Li, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Scheppach |
| Model | HT460-18Li |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5517 MB |
