Scheppach HT460-18Li handleiding
Handleiding
Je bekijkt pagina 15 van 32
15GB
www.scheppach.com service@scheppach.com +(49)-08223-4002-99 +(49)-08223-4002-58
and/or the battery pack from the power tool-
before making any adjust -ments, changing
accessories, or storing power tools. Such pre-
ventive safety measures reduce the risk of starting
the power tool accidentaIly.
• Store idle power tools out of the reach of chil-
dren and do not allow persons unfamiliar with
the power tool or these instructions to operate
the power tool. Power tools are dangerous in the
hands of untrained users.
• Maintain power tools. Check for misalignment
or binding of moving parts, breakage of parts
and any other condition that may affect the
power tool’s operation. If damaged, have the
power tool repaired before use. Many accidents
are caused by poorly maintained power tools.
• Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges
are less Iikely to bind and are easier to control.
• Use the power tool, accessories and tool bits
etc. in accordance with these instructions, tak-
ing into account the working conditions and
the work to be performed. Use of the power tool
for operations different from those intended could
result in a hazardous situation.
Careful handling and use of Battery devices
• Charge the batteries only in chargers that are
recommended by the manufacturer. Risk of re
if a charger that is suitable for a specic type of
battery is used with other batteries
• In the power tools, use only the batteries de-
signed for the purpose. The use of other batteries
may result in injuries and risk of re
• Keep the unused battery away from paper clips,
coins, keys, nails, screws and other small metal
objects, which could cause bridging of the con-
tacts. A short circuit between the battery contacts
may cause burns or re
• If used incorrectly, liquid may leak from the
battery. Avoid contact with this. In the event of
accidental contact, rinse off with water. If the
liquid gets into eyes, seek medical assistance.
Leaking battery uid may cause skin irritations or
burns
Service
• Have your power tool serviced by a qualied
repair person using only identical replacement
parts. This will ensure that the safety of the power
tool is maintained
Safety regulations for hedge trimmers
– Make sure you keep all parts of your body away from
the blades. Never attempt to remove the cuttings with
the blades running or to hold material you wish to cut.
Always switch off the equipment before attempting to
remove any jammed cuttings. A single moment of ca-
relessness when using the hedge trimmer can result
in serious injuries.
and instructions. Failure to comply with safety no-
tices and instructions can cause electric shock, re
and/or severe injuries.
Store all safety notices and instructions for fu-
ture reference.
The term “power tool” used in the safety instructions
refers to mains-powered tools (with a mains cable)
and to battery-powered tools (without a mains cable).
Work area safety
• Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
• Do not operate power tools in explosive atmos-
pheres, such as in the presence of ammable
Iiquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
• Keep children and bystanders away while op-
erating a power tool. Distractions can cause you
to lose control.
Personal safety
• Stay alert, watch what you are doing and use
common sense when operating a power tool.
Do not use a power tool while you are tired or
under the inuence of drugs, alcohol or medi-
cation. A moment of inattention white operating
power tools may result in serious personal injury.
• Use personal protective equipment. Always
wear eye protection. Protective equipment such
as dust mask, non-skid safety shoes, hard hat, or
hearing protection used for appropriate conditions
will reduce personal injuries.
• Prevent unintentional starting. Ensure the
switch is in the off-position before connecting
to power source and/or battery pack, picking
up or carrying the tool. Carrying power tools with
your nger on the switch or energising power tools
that have the switch on invites accidents.
• Remove any adjusting key or wrench before
turning the power tool on. A wrench or a key left
attached to a rotating part of the power tool may
result in personal injury.
• Do not overreach. Keep proper footing and bal-
ance at all times. This enables better control of
the power tool in unexpected situations.
• Dress properly. Do not wear loose clothing or
jewellery. Keep your hair, clothing and gloves
away from moving parts. Loose clothes, jewellery
or long hair can be caught in moving parts.
Power tool use and care
• Do not force the power tool. Use the correct
power tool for your application. The correct
power tool will do the job better and safer at the
rate for which it was designed.
• Do not use the power tool if the switch does not
turn it on and off. Any power tool that cannot be
controlled with the switch is dangerous and must
be repaired.
• Disconnect the plug from the power source
Bekijk gratis de handleiding van Scheppach HT460-18Li, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Scheppach |
| Model | HT460-18Li |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5517 MB |
