Scheppach HS250L SE handleiding
Handleiding
Je bekijkt pagina 39 van 76
www.scheppach.com
GB
|
39
7. Technical data
AC motor 230 V~ 50Hz
Power
*S1 1600W
**S6 40% 2000W
Idle speed 4800 min
-1
Hard metal saw blade
ø 254 x ø 30 x 2,8 mm
Number of teeth 24
Riving knife thickness 2,5 mm
Min. workpiece dimensions
W x L x H 10 x 50 x 1 mm
Table size 546 x 630 mm
Cutting height max. 90°
87 mm
Cutting height max. 45° 55 mm
Height adjustment 0 - 87 mm
Tilting saw blade 0 - 45°
Suction connection ø 40 mm
Weight approx. 19/21 kg
Laser class 2
Laser wavelength 650 nm
Laser power ≤ 1 mW
Laser module power supply 2x1,5V; AAA
Subject to technical modications!
*S1: Continuous operation with constant load
**Operating mode S6 40%: Continuous duty with inter-
mittent loading.
In order avoid impermissible overheating of the motor,
the motor should be driven for only 40% of the operat-
ing time with the stipulated nominal power and must
then continue to run with no load for the remaining 60%
of the operating time.
Noise
The t ota l noi se valu es wer e dete rmi ned i n acc or danc e wit h
EN 62841.
Sound pressure level L
pA
93,5 dB(A)
Uncertainty K
pA
3 dB
Sound power level L
WA
106,5 dB(A)
4. If batteries are swallowed or enter the body in any
other way, seek medical advice immediately. Keep
batteries away from children and animals.
5. Remove batteries from the battery compartment if
they are depleted, or if the circular table saw is out
of use for an extended period of time. This avoids
damage that may arise due to batteries leaking.
6. Never expose batteries to extreme conditions by
storing them on radiators or in direct sunlight for
example.
7. Clean the battery and device contacts if neces-
sary before insertion, with a little emery cloth for
example.
8. Ensure correct polarity during insertion.
9. Do not use old and new batteries of dierent types
together.
Residual Risks
This power tool has been constructed in accord-
ance with the latest technology and the generally
recognised safety regulations. Nevertheless, it is
possible that individual residual risks may occur
during operation.
• Electrical hazard if improper electrical connection
cables are used.
• In addition, concealed residual risks may be present
in spite of all the precautions that have been taken.
• Residual risks can be minimised by observing the
„Safety instructions“ and „Use in accordance with
the designated purpose“, as well as the operating
instructions.
• Do not put any unnecessary stresses on the ma-
chine: excessive pressure during sawing will quickly
damage the saw blade. This may result in a reduc-
tion in the performance of the machine, as well as a
reduction in the cutting accuracy.
• Avoid switching the machine on by accident: when
inserting the plug into the socket, the power button
must not be pressed.
• Use the tool which is recommended in this manu-
al. This will ensure the optimal performance of your
saw.
• Keep your hands away from the working area when
the machine is in operation.
• Before you carry out any adjustments or servicing
work, turn the device o and remove the mains plug.
Bekijk gratis de handleiding van Scheppach HS250L SE, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Scheppach |
| Model | HS250L SE |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 10784 MB |
