Scheppach HC24x handleiding
Handleiding
Je bekijkt pagina 22 van 288
www.scheppach.com
22
|
GB
17. Noise
– Wear hearing protection when using the com-
pressor.
18. Replacing the connection line
– If the connection line is damaged, it must be
replaced by the manufacturer or an electrician
to avoid danger. There is a risk of electric shock.
19. Inating tyres
– Check the tyre pressure immediately after lling
using a suitable pressure gauge, e.g. at a petrol
station.
20. Street-legal compressors in construction site op-
eration
– Ensure that all hoses and xtures are suitable
for the maximum permissible working pressure
of the compressor.
21. Set-up location
– Only set up the compressor on a at surface.
22. It is recommended to equip the feed hoses with a
safety cable in case of pressure above 7 bar, e.g.
using a wire cable.
23. Avoid over-stressing the piping system by using
exible hose connections to prevent kinking.
24. Use a residual current circuit breaker with a trigger
current of 30 mA or less. Use of an RCD reduces
the risk of electric shock.
m WARNING! This device generates an electromag-
netic eld during operation. This eld can impair ac-
tive or passive medical implants under certain circum-
stances.
In order to prevent the danger of serious or deadly in-
juries, we recommend that persons with medical im-
plants consult with their physician and the manufactur-
er of the medical implant prior to operating the device.
ADDITIONAL SAFETY INSTRUCTIONS
Observe the corresponding operating manuals of
the respective compressed air tools / compressed
air attachments! The following general instructions
must also be observed:
Safety instructions for working with compressed
air and air blow guns
• Ensure there is sucient distance to the product, at
least 2.50 m, and keep the compressed air tools /
compressed air attachments away from the com-
pressor during operation.
– Check extension cables regularly and replace
them when damaged.
10. Pull the connector out of the socket
– When the electric tool is not in use, prior to main-
tenance and when replacing tools.
11. Avoid inadvertent starting
– Make sure that the switch is switched o when
plugging the plug into an outlet.
12. Use extension cables for outdoors
– Only use approved and appropriately identied
extension cables for use outdoors.
– Only use cable reels in the unrolled state.
13. Always remain attentive
– Pay attention to what you are doing. Remain
sensible when working. Do not use the power
tool when you are distracted.
14. Check the power tool for potential damage
– Protective devices or other parts with minor
damage must be carefully inspected to ensure
that they function correctly and as intended prior
to continued use of the power tool.
– Check whether the moving parts function fault-
lessly and do not jam or whether parts are dam-
aged. All parts must be correctly mounted and all
conditions must be fullled to ensure fault-free
operation of the power tool.
– Damaged protective devices and parts must be
properly repaired or replaced by a recognised
specialist workshop, insofar as nothing dierent
is specied in the operating manual.
– Damaged switches must be replaced at a cus-
tomer service workshop.
– Do not use any faulty or damaged connection
cables.
– Do not use any power tool on which the switch
cannot be switched on and o.
15. Have your power tool repaired by a qualied elec-
trician
– This power tool conforms to the applicable safety
regulations. Repairs may only be performed by
an electrician using original spare parts. Other-
wise accidents can occur.
16. Attention!
– For your own safety, only use accessories and
additional equipment that are indicated in the
operating manual or have been recommended
or indicated by the manufacturer. Use of other
tools or accessories that those recommended in
the operating manual or in the catalogue could
represent a personal danger to you.
Bekijk gratis de handleiding van Scheppach HC24x, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Scheppach |
| Model | HC24x |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 40205 MB |
