Scheppach HBS25 SE handleiding
Handleiding
Je bekijkt pagina 35 van 56
17 Troubleshooting
Fault Possible cause Remedy
Motor does not work Motor, cable or plug defective,
mains fuses blown,
both safety switches are not correct-
ly engaged.
Arrange for inspection of the product by a specialist.
Never repair the motor yourself. Danger! Check
mains fuses, replace if necessary, engage both
safety switches correctly
The engine runs slowly and
does not reach the operating
speed.
Voltage too low, coils damaged, ca-
pacitor burnt.
Have an electrician check the voltage. Arrange for
inspection of the motor by a specialist. Arrange for
replacement of the capacitor by a specialist.
Engine producing excessive
noise.
Coils damaged, motor defective. Arrange for inspection of the motor by a specialist.
The engine does not reach
full power.
Circuits in the network are overload-
ed (lamps, other motors, etc.).
Do not use any other products or motors on the
same circuit.
Motor overheats easily. Overloading of the motor, insuffi-
cient cooling of the motor.
Avoid overloading the motor while cutting, remove
dust from the motor in order to ensure optimal cool-
ing of the motor.
Saw cut is rough or wavy. Band saw blade dull, tooth shape
not appropriate for the material
thickness.
Resharpen band saw blade or insert suitable band
saw blade.
Workpiece pulls away and/or
splinters.
Excessive cutting pressure and/or
band saw blade not suitable for use.
Insert suitable band saw blade.
Band saw blade drifting. • Band saw blade guide poorly ad-
justed.
• Incorrect band saw blade.
• Adjust the band saw blade guide.
• Insert suitable band saw blade.
Burn marks on the wood
when working.
• Band saw blade blunt.
• Incorrect band saw blade.
• Replace the band saw blade.
• Insert suitable band saw blade.
Band saw blade jams when
working.
• Band saw blade blunt.
• Band saw blade resinous.
• Band saw blade guide poorly ad-
justed.
• Replace the band saw blade.
• Clean the band saw blade.
• Adjust the band saw blade guide.
Motor runs but saw blade
does not move
Belt is not
correctly tensioned
Retighten belt
GB | 35www.scheppach.com
Bekijk gratis de handleiding van Scheppach HBS25 SE, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Scheppach |
| Model | HBS25 SE |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 8367 MB |
