Scheppach GHS7.2 handleiding
Handleiding
Je bekijkt pagina 31 van 48
www.scheppach.com
GB
|
31
• Dispose of batteries when discharged. We recommend covering the poles with an adhesive strip to protect
against a short circuit. Do not open the battery.
• Dispose of batteries according to local regulations. Return batteries to a used battery collection point where
they can be recycled in an environmentally friendly manner. Ask your local waste disposal company about this.
16. Troubleshooting
The following table shows fault symptoms and describes remedial measures in the event of your product failing to
work properly. If you cannot localise and rectify the problem with this, please contact your service workshop.
Fault Possible cause Remedy
Tool cuts out • Internal wiring defective
• On/o switch defective
• Contact dealer / customer service
• Contact dealer / customer service
Motor runs, but blades do not
move
• Internal fault • Contact dealer / customer service
Cutting blades hot • Blades are blunt
• Blades are deformed
• Excessive friction due to
lack of lubricant
• Have blades sharpened
• Have blades checked
• Lubricate blades
Battery does not charge • Power supply unit is not
connected to the mains
• Power supply is defective
• Battery is defective
• Connect the power supply unit to the
mains
• Contact dealer / customer service
• Contact dealer / customer service
Bekijk gratis de handleiding van Scheppach GHS7.2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Scheppach |
| Model | GHS7.2 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6351 MB |
