Scheppach C-HCS85-12/2 handleiding
Handleiding
Je bekijkt pagina 21 van 44
• Make sure the device is switched off before insert-
ing the battery. Inserting a battery into an electric tool
that is switched on can cause accidents.
• Only charge your batteries indoors because the
battery charger is only intended for this purpose.
Danger due to electric shock.
• To reduce the risk of electric shock, unplug the
battery charger from the wall socket before clean-
ing.
• Do not expose the battery to strong sunlight for a
long time and do not place it on radiators. Heat
damages the battery and there is a risk of explosion.
• Allow a heated battery to cool down before
charging.
• Do not open the battery and avoid mechanical
damage to the rechargeable battery. There is a risk
of short-circuiting and vapours may escape that irritate
the respiratory tract. Make sure you get fresh air and
seek additional medical help.
• Do not use accessories that are not recommended
by the manufacturer. This can lead to electric shock
or fire.
Using and handling the cordless tool
a) Recharge only with the charger specified by the
manufacturer. A charger that is suitable for one type
of battery pack may create a risk of fire when used
with another battery pack.
b) Use power tools only with specifically designated
battery packs. Use of any other battery packs may
create a risk of injury and fire.
c) When battery pack is not in use, keep it away from
other metal objects, like paper clips, coins, keys,
nails, screws or other small metal objects, that
can make a connection from one terminal to an-
other. Shorting the battery terminals together may
cause burns or a fire.
d) Under abusive conditions, liquid may be ejected
from the battery; avoid contact. If contact acciden-
tally occurs, flush with water. If liquid contacts
eyes, additionally seek medical help. Liquid ejected
from the battery may cause irritation or burns.
e) Do not use a battery pack or tool that is damaged
or modified. Damaged or modified batteries may ex-
hibit unpredictable behaviour resulting in fire, explo-
sion or risk of injury.
f) Do not expose a battery pack or tool to fire or ex-
cessive temperature. Exposure to fire or temperature
above 130 °C may cause explosion.
g) Follow all charging instructions and do not charge
the battery pack or tool outside the temperature
range specified in the instructions. Charging im-
properly or at temperatures outside the specified
range may damage the battery and increase the risk
of fire.
h) Never service damaged battery packs. Service of
battery packs should only be performed by the manu-
facturer or authorized service providers.
Additional safety instructions
• Before commissioning, ensure that the mains voltage
matches with the operating voltage and the machine's
power rating on the type plate.
Safety instructions for battery charger
ATTENTION
Observe the safety instructions and notes in the operat-
ing instructions of all compatible products you use.
• This product can be used by children from 8 years of
age as well as by persons with reduced physical, sen-
sory or mental capabilities or with a lack of experience
or knowledge, if they are supervised or if they have
been trained in the safe use of the product and under-
stand the resultant hazards. Children may not play
with the device. Cleaning and user maintenance must
not be carried out by children unsupervised.
Safety instructions for all saws
Sawing process
DANGER
Do not place your hands in the sawing area or on
the saw blade. Hold the additional handle or the mo-
tor housing with your second hand. If both hands
hold the saw, they cannot be injured by the saw blade.
a) Do not reach beneath the workpiece. The protective
cover cannot protect you from the saw blade beneath
the workpiece.
b) Adjust the cutting depth to the thickness of the
workpiece. Less than one full tooth height should be
visible beneath the workpiece.
c) Never hold the workpiece that is to be sawn in the
hand or over the leg. Secure the workpiece on a
stable support. It is important to fasten the workpiece
well, in order to minimise any risk of physical contact,
jamming of the saw blade or loss of control.
d) When performing work during which the tool at-
tachment can meet with concealed power lines or
its own connection cable, hold the power tool by
the insulated gripping surfaces. Contact with a live
cable will also energise the metal parts of the electri-
cal tool and will lead to an electric shock.
e) When performing a longitudinal cut always use a
stop or a straight edge guide.This improves the cut-
ting accuracy and reduces the possibility of the saw
blade jamming.
f) Always use saw blades with correct size and
shape (diamond versus round) of arbour holes.
Saw blades that do not match the mounting hardware
of the saw will run off-centre, causing loss of control.
g) Never use damaged or incorrect saw blade wash-
ers or screws. The saw blade washers and screws
have been specially designed for your saw, for opti-
mum performance and operational safety.
Additional instructions
a) Do not use grinding discs.
b) Make sure that a suitable saw blade for the material to
be cut is selected.
GB | 21www.scheppach.com
Bekijk gratis de handleiding van Scheppach C-HCS85-12/2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Scheppach |
| Model | C-HCS85-12/2 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6330 MB |
