Scheppach C-AG125-X handleiding
Handleiding
Je bekijkt pagina 20 van 328
e) Do not use a battery pack or tool that is damaged
or modified. Damaged or modified batteries may ex-
hibit unpredictable behaviour resulting in fire, explo-
sion or risk of injury.
f) Do not expose a battery pack or tool to fire or ex-
cessive temperature. Exposure to fire or temperature
above 130 °C may cause explosion.
g) Follow all charging instructions and do not charge
the battery pack or tool outside the temperature
range specified in the instructions. Charging im-
properly or at temperatures outside the specified
range may damage the battery and increase the risk
of fire.
6) Service
a) Have your power tool serviced by a qualified re-
pair person using only identical replacement
parts. This will ensure that the safety of the power
tool is maintained.
b) Never service damaged battery packs. Service of
battery packs should only be performed by the manu-
facturer or authorized service providers.
Safety instructions for all applications
Special safety instructions for grinding and
cut-off grinding
a)
This power tool is to be used as a grinder and cut-
off grinder. Read all safety warnings, instructions,
illustrations and data that are received with the de-
vice. Failure to observe all the following instructions
may result in electric shock, fire and / or serious injury
b) Operations such as sandpaper grinding, wire
brushing or polishing are not recommended to be
performed with this power tool. Operations for
which the power tool was not designed may create a
hazard and cause personal injury.
c) Do not use the power tool for any function for
which it is not expressly designed and intended
by its manufacturer. Such a modification may result
in loss of control and serious personal injury.
d) Do not use a tool attachment that has not been
specifically envisaged and determined by the
manufacturer for this electric tool. Just because
you can attach the accessories to your power tool
does not guarantee they are safe to use.
e) The maximum speed of the tool attachment used
must be at least as high as the maximum speed
specified for the power tool. Tool attachment that
rotate faster than permitted can break and fly off at
high speed.
f) The external diameter and thickness of the acces-
sory tool used must comply with the dimensions
of the power tool. Incorrectly dimensioned accessory
tools cannot be sufficiently shielded or controlled.
g) The dimensions for fastening the tool attachment
must match the dimensions of the fasteners of the
power tool. Tool attachments which are not precisely
attached to the electric tool rotate unevenly, vibrate
very strongly and can cause a loss of control.
h)
Never use damaged accessory tools. Before each
use, check tools such as grinding discs for chip-
ping and cracks, grinding wheels for cracks, wear
or heavy wear. If the power tool or the accessory
tool in use is dropped, check to see if it is damaged
or use an undamaged accessory tool. Once you
have checked and used the tool attachment, ensure
that you and all other persons in the vicinity remain
outside the plane of the rotating tool attachment
and allow the device to run for 1 min. at the maxi-
mum speed. Damaged accessories usually break
during the test period.
i) Wear personal protective equipment. Depending
on application, use face shield, safety goggles or
safety glasses. Where appropriate, wear a dust
mask, hearing protection, protective gloves or a
special apron that will keep small grinding and
material particles away from you. The eye protec-
tion must be capable of stopping flying debris generat-
ed by various operations. Dust or breathing masks
must filter the dust generated during the respective
use. Prolonged exposure to high intensity noise may
cause hearing loss.
j) Ensure that other people remain at a safe distance
from your workspace. Anyone who enters the
workspace must wear personal protective equip-
ment. Fragments of the workpiece or broken accesso-
ry tools can fly off and cause injury – even outside the
immediate working area.
k) Hold the power tool by the insulated handles
when you are carrying out work in which the ac-
cessory tool may come into contact with con-
cealed power cables. Contact with a live wire may
make exposed metal parts of the power tool live and
could give the operator an electric shock.
l) Keep the power cord away from any rotating ac-
cessories. If you lose control of the device, the mains
cable can be severed or caught and your hand or arm
pulled into the rotating insert tool.
m) Never put the power tool down until the accessory
tool being used has come to a complete standstill.
The rotating accessory tool can come into contact with
the surface and cause you to lose control of the power
tool.
n) Do not run the power tool while carrying it at your
side. Accidental contact of your clothing with the rotat-
ing attachment part could lead to an injury.
o) Clean the ventilation slits of your power tool regu-
larly. The engine fan draws dust into the housing and
a strong accumulation of metal dust can cause electri-
cal hazards.
p) Never use the power tool in the vicinity of inflam-
mable materials. Sparks can ignite such materials.
q) Do not use any accessory tools which require liq-
uid coolant. The use of water or other liquid coolants
may lead to an electric shock.
Kick-back and corresponding safety
instructions
Kick-back is the sudden reaction resulting from a caught
or jammed rotating insert tool, such as a grinding disc,
grinding wheel, etc. Catching or jamming results in the ro-
tating insert tool stopping abruptly. As a result, an uncon-
trolled electric tool is accelerated against the direction of
rotation of the tool attachment at the blocking point.
20 | GB www.scheppach.com
Bekijk gratis de handleiding van Scheppach C-AG125-X, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Scheppach |
| Model | C-AG125-X |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 48857 MB |
