Scheppach BCHS350-ProS handleiding
Handleiding
Je bekijkt pagina 46 van 72
www.scheppach.com
46
|
GB
18. Troubleshooting
The following table shows fault symptoms and describes remedial measures in the event of your machine failing to
work properly. If you cannot localise and rectify the problem with this, please contact your service workshop.
Fault Possible cause Remedy
Device does not work
Battery empty Charge battery
Battery not inserted correctly Remove battery and reinsert
Device works intermittently
External loose contact
Contact a specialist workshopInternal loose contact
On/o switch defective
Dry the saw chain
No oil in the tank Top up oil
Ventilation in the oil fuel cap clogged Clean oil fuel cap
Oil outow channel clogged Unclog oil outow channel
Chain / guide rail hot
No oil in the tank Top up oil
Ventilation in the oil fuel cap clogged Clean oil fuel cap
Oil outow channel clogged Unclog oil outow channel
Chain blunt Sharpen or replace chain
Chain too tight Check chain tension
Chainsaw plucks, vibrates or does
not saw properly
Chain tension too slack Adjust chain tension
Chain blunt Sharpen or replace chain
Chain worn Replace chain
Saw teeth point in the wrong direction
Remount saw chain with teeth
pointing the correct direction
Bekijk gratis de handleiding van Scheppach BCHS350-ProS, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Scheppach |
| Model | BCHS350-ProS |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 10398 MB |
