Scheppach BCH3300PB handleiding
Handleiding
Je bekijkt pagina 32 van 172
www.scheppach.com
32
|
GB
Assembly
When assembling this machine, please follow the
specied assembly instructions.
1. Fitting the handle on the machine (g. 4 - 6)
• First loosen the hexagon socket screws and then
bring the right and left handle into the centre of the
handle holder.
• Then t the handle holder and tighten the internal
screws.
2. Fitting the shaft (g. 7)
• Push the lower part of the shaft (b) down until the
locking pin (a) engages in the hole (c) of the shaft.
It is easier if you rotate the bottom of the shaft (b)
slightly in both directions. The pin (a) is in the cor-
rect position when it is fully seated in the hole.
• Then tighten the button (d) securely.
3. Fitting the protection (g. 11 - 13)
• Fix the guard using the spanner supplied as a
standard accessory.
• Tighten the screws.
m Warning! Only use original spare parts and ac-
cessories from the manufacturer. Failure to do so can
reduce performance, result in injuries and void your
warranty. Never use the machine without the protec-
tion assembled!
4. Assembling and disassembling the two cut-
ting devices
Grass trimmer/thread coil (g. 14 - 15)
• Release the nut.
Align the two holes of the ange and cover. Hold
the ange with a screwdriver and rotate the socket
spanner clockwise; the nut will loosen.
• Attach the nylon cutting head.
Remove the cover by loosening the nut. Continue to
hold the ange, attach the nylon cutting head to the
shaft and rotate it anti-clockwise; the nylon cutting
head is attached. (g. 15)
• Loosen the nylon cutting head.
Hold the ange with a screwdriver and then screw the
nylon cutting head clockwise; now it can be replaced
.
1. Fuel and oil
Recommended fuels
Use only a mixture of unleaded petrol and special
2-stroke engine oil. Mix the fuel mixture as per the
fuel mixing table.
Attention: Do not use a fuel mixture that has been
stored for more than 90 days.
Attention: Do not use 2-stroke oil that recommends
a mixing ratio of 100:1. The engine guarantee of the
manufacturer becomes invalid in the event of damage
to the engine due to insucient lubrication.
Attention: Use only designated and approved vessels
for the transport and storage of fuel.
Put the correct amount of petrol and 2-stroke oil in-
to the enclosed mixing bottle. Then shake the ves-
sel well.
Never use oil for 4-stroke engines or water-cooled
2-stroke engines. This can cause the spark plug to
become fouled, the exhaust part to become blocked
or the piston ring to become stuck.
Fuel mixtures that have not been used for one month
or longer can clog the carburettor or impair engine op-
eration. Put unused fuel in an airtight vessel and store
it in a dark, cool room.
2. Fuel mixing table
Mixing process: 40 parts petrol to 1 part oil
Example:
1 l petrol: 0.025 l 2-stroke oil
5 l petrol: 0.125 l 2-stroke oil
Warning! Pay attention to the exhaust gases.
Always switch o the engine before refuelling.
Never add petrol to the device while the engine is
running or it is hot. There is a risk of re!
8. Assembly and operation
m Attention!
Always make sure the product is fully assembled
before commissioning!
Bekijk gratis de handleiding van Scheppach BCH3300PB, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Scheppach |
| Model | BCH3300PB |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 23598 MB |
Caratteristiche Prodotto
| Kleur van het product | Black, Grey, Red |
| Gewicht | 9520 g |
| Breedte | 300 mm |
| Diepte | 300 mm |
| Vermogen | - W |
