Scheppach BCH3300PB handleiding
Handleiding
Je bekijkt pagina 28 van 172
www.scheppach.com
28
|
GB
7. Throttle interlock
8. Throttle
9. “Locking” throttle
10. Choke lever
11. Start pull cord
12. Spark plug connector
13. Fan housing cover
14. Fuel tank
15. Housing for engine cooling
16. Fuel pump
17. Carrying strap
18. Oil-petrol mixing bottle
19. Spark plug wrench
20. 4 mm Allen key
21. 5 mm Allen key
22. Cable ties
3. Proper use
The product may only be used in the intended manner.
Any use beyond this is improper. The user/operator, not
the manufacturer, is responsible for damages or inju-
ries of any type resulting from this.
An element of the intended use is also the observance
of the safety instructions, as well as the assembly in-
structions and operating information in the operating
manual.
Persons who operate and maintain the product must be
familiar with the manual and must be informed about
potential dangers.
The liability of the manufacturer and resulting damages
are excluded in the event of modications of the prod-
uct.
The product may only be operated with original parts
and original accessories from the manufacturer.
The safety, operating and maintenance specications
of the manufacturer, as well as the dimensions speci-
ed in the technical data, must be observed.
The brush cutter (using the cutting knife) is suitable for
cutting shrubs, strong weed and undergrowth.
The motorised trimmer (use of the thread coil with cut-
ting thread) is suitable for cutting lawns, grassy are-
as and light weeds. The observance of the manufac-
turer's usage instructions included is a prerequisite
for the proper use of the device. Any other use not
expressly permitted in these instructions may result
in damage to the device and pose a serious danger
to the user. Be sure to observe the restrictions in the
safety instructions.
1. Introduction
Manufacturer:
Scheppach GmbH
Günzburger Straße 69
D-89335 Ichenhausen
Dear Customer,
We hope your new product brings you much enjoyment
and success.
Note:
In accordance with the applicable product liability laws,
the manufacturer of this product assumes no liability
for damage to the product or caused by the product
arising from:
• Improper handling
• Non-compliance with the operating manual
• Repairs carried out by third parties, unauthorised
specialists
• Installing and replacing non-original spare parts
• Improper use
• Failure of the electrical system in the event of the
electrical regulations and VDE provisions 0100, DIN
57113 / VDE 0113 not being observed
Note:
The operating manual is part of this product. It includes
important instructions for the safe, proper and econom-
ic operation of the product, for avoiding danger, for min-
imising repair costs and downtimes and for increasing
the reliability and extending the service life of the prod-
uct. In addition to the safety instructions in this operat-
ing manual, you must also observe the regulations ap-
plicable to the operation of the product in your country.
Familiarise yourself with all operating and safety in-
structions before using the product. Only operate the
product as described and for the specied areas of ap-
plication. Keep the operating manual in a good place
and hand over all documents when passing the product
on to third parties.
2. Product description (g. 1)
Scope of delivery
1. Thread coil with cutting thread
2. Protection
3. Guide bar with drive shaft
4. Cutting blade
5. Guide handle
6. On/o switch
Bekijk gratis de handleiding van Scheppach BCH3300PB, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Scheppach |
| Model | BCH3300PB |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 23598 MB |
Caratteristiche Prodotto
| Kleur van het product | Black, Grey, Red |
| Gewicht | 9520 g |
| Breedte | 300 mm |
| Diepte | 300 mm |
| Vermogen | - W |
