Handleiding
Je bekijkt pagina 21 van 58
- 21 -
www.SCEPTRE.com
SCEPTRE X50 FHD Display User Manual
Connecting to a PC with VGA and 3.5 mm minijack …
1. Make sure the power of HD display and your PC is turned off.
2. Obtain a 15-pin D-Sub VGA cable; connect to the VGA output of your PC and the
other end to the VGA port on the back of your HD display.
3. Obtain a 3.5 mm Mini-jack, connect to the audio out of your PC and the other end
to the VGA Stereo Input port.
4. Turn on the power of the HD display and your PC.
5. Use the remote control’s source button or the source button on the display to
switch to PC.
6. Change your PC resolution to 1920x1080 at 60 Hz refresh rate.
7. Press MENU to use the OSD’s PICTURE option.
8. Under the PICTURE option select PC Settings.
9. Under PC Settings use AUTO ADJUST to adjust the screen.
Please Note:
For the best results, please set your PC resolution to 1920x1080 at
60 Hz. Please refer to the PC or graphic card’s manual for further
instructions on how to set your resolution and refresh rate.
Please refer to your PC manual for video output requirements of the
video card.
The VGA port of the display features a power saving mode which will
automatically turn off the display, if there’s no signal provided for more
than 10 minutes.
Bekijk gratis de handleiding van Sceptre X505BV-FMQCC, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Sceptre |
| Model | X505BV-FMQCC |
| Categorie | Televisie |
| Taal | Nederlands |
| Grootte | 2820 MB |
