Handleiding
Je bekijkt pagina 12 van 54
- 12 -
www.SCEPTRE.com
SCEPTRE X270 HDTV User Manual
The following descriptions are for connections from left to right.
A. AC POWER IN – This connection provides the LCD TV with power.
B. USB – USB connects to USB flash drives for playing music and picture. The USB port is
also used for updating the TV’s firmware.
C. HDMI1 – HDMI connects to devices that use HDMI cable, such as Blu-ray or HD DVD
player, or HD cable / satellite set-top box. This connection port receives pure digital
audio and high definition signal through one single cable. This port also can accept a
HDCP video device for video.
D. HDMI2 – Refer to HDMI1.
E. VGA STEREO INPUT - This connection port is for people who want to provide audio to
the TV when using a PC or a DVI video device. The sources use 3.5mm mini-jack audio
cable.
F. VGA - This connection port connects to a PC for video using VGA cable. Be sure to
connect your audio cable to the VGA Stereo input if you want sound out of VGA video
source.
G. YPBPR (video) – This connection port is for DVD players or satellite / cable set-top
boxes that use component cables. From left to right, connect green, blue, and red for
video.
H. YPBPR (audio) – This connection port is for DVD players or satellite / cable set-top
boxes that use component cables. From left to right connect white for left channel audio,
and red for right channel audio.
I. AUDIO OUT – This connection port is used for sending out analog audio signals with red
and white RCA type connectors.
J. AV/SVIDEO (audio) – This connection port is used for receiving audio signals for
SVIDEO or AV port.
K. TV – This connection is for digital or analog cable without the cable box or over-the-
airwave antennas. The tuner is a hybrid tuner that tunes to both analog and digital
channels. This connection uses coaxial RF cable. For over-the airwave digital stations
please check http://www.antennaweb.org
.
L. AV – AV connects to devices that use composite video cables such as VCR or DVD
player or Wii™. Connect the yellow for video and the red / white for audio.
M. S-VIDEO – S-VIDEO connects to devices such as SVCR or camcorder or video game
consoles. The S-VIDEO connection shares audio red & white connectors with AV.
Please connect the video portion with the S-Video connector. Do NOT connect both
video connectors.
N. SPDIF OUT - This connection port is used for sending out digital audio signals to digital
surround sound receivers. The orange (COAX SPDIF OUT) connector sends out either
bit-stream or PCM digital sound signal to a home theater receiver with digital coax input.
O. HDMI3 – Refer to HDMI1.
P. HEADPHONE – This connection is for headphones to be attached to the TV.
Please Note:
This TV features a power saving function which will turn off the TV automatically
after 5 minutes of idling on a connection with no signal. This feature is present on
all connection.
SPDIF digital audio out only outputs digital PCM signals. USB flash drive
music will not output with SPDIF digital audio out. USB flash drive music will
only output with analog audio out under label I.
Bekijk gratis de handleiding van Sceptre X270BV-FHD, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Sceptre |
| Model | X270BV-FHD |
| Categorie | Televisie |
| Taal | Nederlands |
| Grootte | 3572 MB |
