Handleiding
Je bekijkt pagina 16 van 32
www.SCEPTRE.com
SCEPTRE E24 FHD Display User Manual
If You have VGA Connection on Your Video Card…
1. Make sure the power of E27 LED MONITOR is turned off.
2. If you were previously using a CRT (bulky) monitor, please hook up your old monitor
first and make sure your refresh rate is set to 75 Hz frequency before using the E27 LED
MONITOR. You can find the refresh rate information and change it by RIGHT CLICKING
on the desktop with nothing selected. After you have right clicked, select the
PROPERTIES option. Click on the SETTINGS tab. Click on the ADVANCED button.
Click on the MONITOR tab. In that tab, change the refresh rate to 75 Hz and click on
APPLY. After the refresh rate changed, please shut down the computer and monitor.
3. Obtain the VGA cable and connect to the VGA connection on your PC. Connect the other
end of the cable to your E24 LED MONITOR.
4. Turn on the power of both the E24 LED MONITOR and the PC.
Please Note:
• The PC’s clearest picture is ran with 1920 x1080 at 75 Hz.
• If the VGA port receives no signal for over 1 hour, the monitor will auto shut-
off.
- 16 -
Bekijk gratis de handleiding van Sceptre E248W-19203RS, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Sceptre |
| Model | E248W-19203RS |
| Categorie | Monitor |
| Taal | Nederlands |
| Grootte | 4570 MB |
