Handleiding
Je bekijkt pagina 20 van 56
- 20 -
www.SCEPTRE.com
SCEPTRE E195 Series LED HDTV User Manual
Connecting to a PC with VGA and 3.5 mm minijack …
1. Make sure the power of HDTV and your PC is turned off.
2. Obtain a 15-pin D-Sub VGA cable; connect to the VGA output of your
PC and the other end to the VGA port on the back of your HDTV.
3. Obtain a 3.5 mm Mini-jack, connect to the audio out of your PC and the
other end to the VGA Stereo Input port.
4. Turn on the power of the HDTV and your PC.
5. Use the remote control’s source button or the source button on the TV to
switch to VGA.
6. Change your PC resolution to 1360x768 at 60hz refresh rate.
7. Press MENU to use the OSD’s PICTURE option.
8. Under the PC SETUP use the AUTO ADJUST to adjust the screen.
Please Note :
• For the best results, please set your PC resolution to
1360x768 at 60 Hz. Please refer to the PC or graphic card’s
manual for further instructions on how to set your resolution
and refresh rate.
• Please refer to your PC manual for video output requirements
of the video card.
• The VGA port of the TV features a power saving mode which
will automatically turn off the TV, if there’s no signal provided
for more than 5 minutes.
Bekijk gratis de handleiding van Sceptre E195BV-SHD, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Sceptre |
| Model | E195BV-SHD |
| Categorie | Televisie |
| Taal | Nederlands |
| Grootte | 14017 MB |
Caratteristiche Prodotto
| Kleur van het product | Zwart |
| Gewicht verpakking | 3500 g |
| Breedte verpakking | 577.85 mm |
| Diepte verpakking | 120 mm |
| Hoogte verpakking | 411.2 mm |
