Handleiding
Je bekijkt pagina 29 van 38
- 29 -
www.SCEPTRE.com
SCEPTRE C25 Display User Manual
Troubleshooting
Problem
Possible solutions
THERE IS NO LED
DISPLAY or
SCREEN SAYS NO
SIGNAL
Make sure you switched to the correct source. Check both
sources to see the video is on the other source. Check your
video cable. It might be corrupt. Swap out the video cable for
another one to see if the monitor will work. Check your
power plug. See if it is fully plugged in on both the monitor
and the wall.
MONITOR SAYS
“SIGNAL OUT OF
RANGE”
If you have a CRT monitor, please connect the CRT monitor to
the computer and change the refresh rate down to 60Hz via your
video card’s display settings menu. After the setting of
60Hz has been changed; you can then use the C25 LED Monitor
on the computer.
1. To change the setting, go to display settings by right-
clicking on your desktop with nothing selected.
Choose the PROPERTIES option.
2. Click on the SETTINGS tab, verify the resolution is
NOT higher than 1920 x 1080, and click on the
ADVANCED button.
3. Click on the MONITOR tab and change the refresh
rate to 60Hz.
4. Click on OK 2-3 times to finalize your change.
If you do NOT have a CRT monitor or it is already broken, please
make sure both the C25 LED monitor and your computer is
turned off.
1. Turn on the LED monitor and the computer.
2. While the computer is turned on, press the “F8” key
on your keyboard continuously until a selection menu
appears and select the “Safe Mode” option.
3. When you have entered Safe Mode, please uninstall
any video card driver, and monitor driver by using
either the “Add / Remove Programs” icon or going into
“System Properties” and manually removing anything
under “Monitors” and “Display Adapters.” After
removing all the drivers, please reboot your computer,
and you should see windows. Please install your
monitor driver first, then your video card driver. Please
remember to make sure your refresh rate should be at
60Hz.
I CAN’T OPEN THE
OSD
You need to have a valid video signal going through the monitor
before turning on the OSD.
Bekijk gratis de handleiding van Sceptre C255B-FWT240, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Sceptre |
| Model | C255B-FWT240 |
| Categorie | Monitor |
| Taal | Nederlands |
| Grootte | 1953 MB |
