Handleiding
Je bekijkt pagina 28 van 37
- 28 -
www.SCEPTRE.com
SCEPTRE A55 Series User Manual
Problems
Solutions
CHANNELS ARE
BLOCKED
Check your auto lock function’s settings inside the OSD. You
may have locked up some channels but forgot about them.
Refer to parental or channels options for more instructions.
THE DISPLAY
TURNS
ON OR OFF SLOWLY
AND THE SCREEN
SHOWS UP SLOWLY
This display is a High Definition liquid crystal display panel. It
requires a few more seconds than normal TVs to power up
and show the picture.
HDCP VIDEO SAYS
NO HDCP SUPPORT
Reboot your HDCP video device but turning them off and
unplugging the power cord. Wait up to 8 minutes to plug the
power back in to see if it works or not.
PICTURE IS
DISTORTED OR HAS
ABNORMAL SOUND
This might be from interference from large electrical
appliances, cars, motorcycles, or fluorescent lights. If the
display is close to the wall, try moving the display to another
room in your house to see if the problem still occurs.
PICTURE DOES NOT
COVER THE ENTIRE
SCREEN
If you’re using HDMI or a display digital channel make sure
you use the ASPECT button to switch to 16:9 format. Please
Note: If you are using regular analog channel, AV, or
component in 480i resolution, use the ASPECT button to
switch to 16:9 in order to fill up the screen. Please Note: This
note this feature will distort the picture.
PICTURE QUALITY IS
HORRIBLE!!
For best image quality, view HD widescreen programs where
possible. If HD content is not available view “Standard
Definition” from a digital source. Standard, analog channels
will always be noticeable inferior to HD because your display
has video that is many times better than old TV’s and so you
can see interference and deficiencies you did not KNOW you
had.
PICTURE HAS
PIXELS THAT ARE
ALWAYS
DISPLAYING THE
SAME COLOR
Your display is manufactured using an extremely high level of
precision technology;
however, sometimes some pixels of your
display may not show up. Pixels defects within industry
specifications are inherent to this type of product and do not
constitute a defective product.
I CANNOT CHANGE
THE TIME MANUALLY
Your display syncs time automatically according to your local
televised channel. This function only works while the TV tuner
is connected to an ANTENNA.
BIG BLACK BOX IN
THE MIDDLE OF
SCREEN
You have turned on closed captioning and are using TEXT1 –
TEXT4. Change the setting to CC1 or turn off closed
captioning and the box will disappear. Refer to page 34 for
more information.
SWITCHING A
CHANNEL OR
SOURCE CHANGES
THE VOLUME
Different channels and inputs will sometimes have this effect
because the channel signal’s own volume is already loud.
There is no way remove this completely. The display has an
AUTO VOLUME LEVEL function that can combat this type of
effect. Please make sure that function is turned on.
THERE IS NOISE OR
TRASH PIXELS ON
THE SCREEN
When your display’s resolution is higher than the digital
channel’s broadcast resolution, the signal is up-converted to
match your display’s resolution. Up-converting can cause this
type of effect.
Bekijk gratis de handleiding van Sceptre A550CV-UMC, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Sceptre |
| Model | A550CV-UMC |
| Categorie | Televisie |
| Taal | Nederlands |
| Grootte | 1928 MB |
