Handleiding
Je bekijkt pagina 4 van 12

4
ENG
IM2024
removed, meat must be separated from bones and tendons.
• The chopper is not suitable for crushing ice and chopping hard products, such as coee grains,
nutmegs, cereals.
• Caution! The chopping blade is very sharp! Hold the blade by the top plastic area only!
• Place the blade on the central nger in the jar.
• Add ingredients into the jar.
• Cover the jar with the drive.
• Place the motor base into the jar drive until tightened.
• While chopping, hold the motor base with one hand, accessory jar – with the other hand.
• When nished, remove the motor base rst.
• Then remove the jar drive.
• Remove the blade carefully.
• At this point you may remove chopped ingredients from the jar.
ACESSORY FOR WHISKING / LIQUID PRODUCTS BLENDING
• Use the whisk for creaming, eggbeating, desserts blending. Never use this accessory for kneading.
• Insert the accessory into adapter and place them on the motor base.
• For secure connection turn the attachment counter-clockwise to align the arrow drawn on the
attachment with the lock icon on the main unit.
• Prior to start processing, immerse the whisk into the jar with ingredients. Start processing at low
speed.
OPERATION
• Make sure you have assembled the unit completely and in a proper way.
• Plug the unit to power supply.
• Select the desired speed with the switch.
• The blender is equipped with “TURBO” mode. Press and hold TURBO button to increase the power
in maximum. To return to normal speed, release the button.
PULSE MODE
• Press and hold the pulse button. The unit will operate while the button is held pressed.
FOOD MAXIMUM QUANTITY MAXIMUM TIME, sec
Almonds 100 g 15
Boiled eggs 200 g 10
Breadcrumbs 20 g 15
Garlic 150 g Pulse
Gruyere 100 g 15
Hazelnuts 100 g 15
Ice cream 200 g 20
Light Batter 0.4 L 15
Onions 200 g Pulse
Parsley 30 g 10
Shallots 200 g Pulse
Meat 150-200 g 15
Ice 200 g Pulse
NOTE: continuous operation time of the processor must not exceed 1 minute, rest time
between operation must be at least 4 minutes (for mini-chopper 0.5 min / 3 min).
• It is strongly prohibited to remove any of accessories while the unit is operating.
CLEANING AND CARE
• Switch o and unplug the appliance.
• Wash the accessories immediately and avoid soaking them in water for long periods; wash in warm
sudsy water after each use. Dry all accessories with a clean soft cloth.
• Wipe the housing with a damp cloth.
• Do not use scouring pads, abrasive and harsh detergents.
Bekijk gratis de handleiding van Scarlett SC-HB42F68, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Scarlett |
| Model | SC-HB42F68 |
| Categorie | Blender |
| Taal | Nederlands |
| Grootte | 1293 MB |



