Sauermann TH 210-R handleiding
Handleiding
Je bekijkt pagina 6 van 32
1.3. Selection of the output signal
The selection of the output signal in voltage (0-10 V or 0-5 V) or in current (4-20 mA or 0-20 mA) must be performed with
the transmitter NOT ENERGISED and is made with the DIP switch of the electronic board putting the on-off switches as
shown on the table below:
Conguration 4-20 mA 0-10 V 0-5 V 0-20 mA
Combinations
1.4. Protection tip of the sensors
It's extremely unwise to remove the protection tip of our hygrometry probes as the sensitive
element is very fragile even to light contacts. However, if you have to remove the protection tip,
take all possible precautions and AVOID ANY CONTACT with the sensitive element.
To remove the protection tip, unscrew it or unclip it.
6
INTRODUCTION
2
3
41
2
3
41
2 3 41
2
3
41
Protection tip
to unscrew
Protection tip
to unscrew
Sensitive
element
Sensitive
element
Bekijk gratis de handleiding van Sauermann TH 210-R, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Sauermann |
| Model | TH 210-R |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3582 MB |
