Sauermann CTV 210-R handleiding
Handleiding
Je bekijkt pagina 8 van 32
3. ACCESS TO THE DIFFERENT FUNCTIONS
This step is compulsory for each conguration.
First, to access to the transmitter functions, and for safety, a safety code must be entered. This safety code is 0101 and can
not be modied.
The transmitter must be energised.
➢ Connect the transmitter.
➢ Wait for the initialisation phase.
➢ Press OK.
The screen displays “Code” with “0000”. The rst 0 blinks.
➢ Press OK to go to the second 0.
It blinks.
➢ Press Up key to display 1 then press OK.
The third 0 blinks.
➢ Press OK to go to the fourth 0.
➢ Press Up key to display 1 then press OK.
The following screen is displayed:
“F 100” is for the number of the conguration folder. There are 6 folders:
• F 100: folder of the transmitter conguration. See page 9
• F 200: folder of the channels and units of measurement. See page 11
• F 300: folder of the analogue outputs. See page 12
• F 400: folder of the relays conguration. See page 16
• F 500: folder of the measurement conguration. See page 18
• F 600: folder of the measurement conguration specic to the COT212-R, CP210-R and CTV210-R transmitters.
See page 21
To select the required folder:
“F 100” is displayed and 1 is blinking.
➢ Press Up key until the number of the required folder is display (“F 100”, “F 200”, “F 300”, “F 400”, “F 500”
or “F 600” according to the type of transmitter).
➢ Press OK.
If a wrong code is entered, “CODE” blinks a few seconds on the bottom right of the screen then
the measured values are displayed. It is necessary to enter the right code.
8
ACCESS TO THE DIFFERENT FUNCTIONS
F 100
Code
0101
Bekijk gratis de handleiding van Sauermann CTV 210-R, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Sauermann |
| Model | CTV 210-R |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3582 MB |
