Sauermann CTV 210-R handleiding

32 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 14 van 32
6.3. Set the purge time (CP210-R)
The purge mode enables to freeze the measurement when being displayed, enables to lock the analogue outputs, and to
activate the relay 1, in order to actuate a de-dust system of an air movement conditions system and to activate the relay 2
in order to isolate the transmitter.
Here is the detailed process of the purge mode:
1. Measurement is frozen.
2. Wait for 3 seconds.
3. Activation of the relay 2 (isolation of the transmitter).
4. Wait for time-delay (for example: 10 seconds).
5. Activation of the relay 1 (sending compressed air into the network to clean the installation).
6. Purge duration (for example: 30 seconds).
7. Deactivation of the relay 1 (stop sending compressed air).
8. Wait for time-delay (for example: 10 seconds).
9. Deactivation of the relay 2.
10. Wait for 3 seconds.
11. Recovery of the measurement.
The transmitter is powered on.
Enter the activation code (see page 8).
Press OK.
Press Up key to go to the “F 300” folder.
Press OK.
Press Up key to go to the “F 390” folder corresponding to the purge mode setting.
Press OK.
With the Up and Down keys, select ON to activate the purge mode or OFF to deactivate it.
Press OK.
Press Up key to go to the “F 391” folder corresponding to the purge duration setting.
Press OK.
14
F 300: ANALOGUE OUTPUTS MANAGEMENT

Bekijk gratis de handleiding van Sauermann CTV 210-R, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkSauermann
ModelCTV 210-R
CategorieNiet gecategoriseerd
TaalNederlands
Grootte3582 MB