Sanus LSF110 handleiding
Handleiding
Je bekijkt pagina 10 van 24
10
1. Locate your stud. Verify and mark the center of the stud by finding the stud edges using an awl, a thin nail, or an edge to edge stud finder.
2. Position the wall plate template
07
at your desired height and line up the holes with your stud center line. Level the template and tape in place.
3. Drill pilot holes using a 7/32 in. (5.5 mm) diameter drill bit. Remove wall plate template
07
.
IMPORTANT: Be sure to drill into the center of the stud.
IMPORTANT: Pilot holes must be drilled to a depth of 2½ in. (63.5 mm).
THIS WAY UP
THIS WAY UP
STEP 2A Attach Wall Plate
Wood Stud Installation
THIS WAY UP
THIS WAY UP
2
THIS WAY UP
THIS WAY UP
3
5/8 in.
(≤ 16 mm)
1
NOTE: TV shifts 7/8 in. (21.9 mm) to the right or left
when in the home position. Consider this when selecting the
location of your wall mount.
CAUTION: Avoid potential personal injury or property damage!
● Drywall covering the wall must not exceed 5/8 in. (16 mm)
● Minimum wood stud size: nominal 2 x 4 in. (51 x 102 mm) actual 1 ½ x 3 ½ in. (38 x 89 mm)
2½
in. (
63.5
mm)
7/32 in.
(5.5 mm)
07
07
Bekijk gratis de handleiding van Sanus LSF110, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Sanus |
| Model | LSF110 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3366 MB |
