Sangiorgio Slim-HS714-T handleiding
Handleiding
Je bekijkt pagina 42 van 44
42
1. Terms and Conditions of the Conventional Warranty
This conventional warranty is to be considered additional and not replacing ant other right of the customer,
being understood that customer is exclusively the physical person beyond any managerial or professional
activity, who uses the household appliance for domestic/private use - ex Legislative Decree 6 September
2005, n. 206.
The conventional warranty has to be considered as a guarantee to free replacement or repair of parts
of the appliance that show defects of conformity within 24 months of the date of purchase (12 months if
purchased through commercial invoice and not scal receipt).
The conventional warranty is valid only on Italian territory including the Republic of San Marino and
Vatican City and may be proved by a document issued by the retailer or other documentary proof (ie. scal
receipt, invoice or document of delivery) reporting the name of the seller, date of delivery of the household
appliance and, identi cation details of the latter (type of model).
2. Validity of the warranty
This warranty has full validity during the above mentioned period if:
The user claims the conformity defect within two months of its discovery; All operations such as installing,
connecting to the domestic system and functioning of the appliance shall be executed following the use
and maintenance instructions on the user manual carefully; All operations such as use, maintenance and
daily care of the washing machine shall be executed in accordance with the prescriptions and instructions
reported in this user guide.
Make sure any repair intervention is made exclusively by technicians belonging to After-Sale Service
Centers authorized by the Manufacturer and using original spare parts only.
3. Intervention with warranty
During the validity period of this Warranty (24 months after the date of purchase), in case the authorized
after-sale service has acknowledged a lack of conformity due to manufacturing defects, the manufacture
commits itself to repair/replace the household appliance without costs for the customer.
The replacement of the appliance can take place only in case it is objectively possible and not
disproportionate compared to repair.
According to art. 130 of the Consumer Code, the requested solution is “disproportionate” if it imposes costs
on the seller which, in comparison to other remedies, are unreasonable, taking into account the value
the goods would have if there were no lack of conformity, the signi cance of the lack of conformity, and
whether the alternative remedy could be completed without signi cant inconvenience to the consumer.
All requests regarding replacement or repair of the household appliance have to be evaluated by the
After-Sale Service whose opinion is binding and indisputable. Any repair/replacement of components or
appliance do not extend the duration of this warranty which shall continue, in any case, until its expiry date
as provided for in previous clause 1.
As from more than 6 months after the date of delivery of the product to the consumer, period of time during
which the defect of conformity can be considered to be already existed on that date (art. 132 of Consumer
Code), and only when the malfunction does not depend on a vice of conformity, SANGIORGIO IT Wash
may ask the reimbursement of the cost to the consumer – always reasonable and previously indicated –
incurred for the veri cation of the malfunctioning.
4. Exclusion clauses
This Conventional Manufacturer Warranty does not cover interventions and/or repairs and/or spare parts
which shall result defective for the following reasons:
a) Damages caused by transport or handling of the household appliance, or damages arising from
circumstances and/or events caused by force majeure, which, in any case, cannot be connected to
manufacturing defects of the household appliance.
WARRANTY CERTIFICATE
b) Operations of installation and assembly (for example: fault connection/power supply; lack of the
protective earth connection; inadequate water supply/drain; removal of the xing brackets on the tub; any
possible regulation such as the oor level under the household appliance).
c) An incorrect, improper or incomplete installation, lack of capacity to use by the Consumer or Installer,
if there is no enough place to operate around the product (at least 3 cm on the upper side, 8 cm on
both sides and 8 cm on the rear) or excessively high/low temperature of the environment (in case the
household appliance has been placed on balconies, terraces, roofs, in direct contact with atmospheric
agents: sun, rain, cold and lightning).
d) Interventions where the claimed defect was not found, due to a misleading impression of the
consumer (for example: noise, vibration or hooping, excessive foam, no spinning, it does not wash
properly, it tears the garments, etc.).
e) Intervention on products placed in improper positions or in dangerous areas (roofs, etc.) which may
not guarantee the operator safety as established by Law 626-94 concerning safety at work.
f) Damages caused by weathering agents (lightning, earthquakes, res, oods, etc.)
g) If the serial number results to be removed, erased or modi ed.
h) Failure to comply with the instructions for use and maintenance as reported in the correspondent user
manual (drain lter and water supply, removal of foreign objects, excessive load, etc.).
i) Maintenance, repair, modi cations or tampering operations (removal of the top, back plate, etc.)
executed by personnel not authorized by the manufacturer and/or use of non original spare parts.
j) Lack of scal documents or when they appear to be counterfeited or not related to the product.
k) Negligence and carelessness and/or improper use of the appliance (not for domestic use and
di erently in any way from what established by the manufacturer).
l) For any other external circumstance not related to manufacturing defects of the household appliance.
This warranty only covers defects of conformity of the product and therefore it does not include regular
check and maintenance operations. Consequently, in case there has been an intervention at the request
of the consumer made by a technician of the after-sale service centre, for reasons related to above
mentioned situations, the costs for the intervention and any spare part needed shall be totally charged to
the consumer.
5. Limitations to the Manufacturer Liability
The manufacturer cannot be held liable for damages that could a ect, directly or indirectly, persons or
goods resulting from failure to comply with instructions included into the correspondent user manual, in
particular those regarding the installation, use and maintenance of the household appliance.
This Warranty is the unique Warranty given by the manufacturer. No third party is authorised to modify its
terms or to give other oral or written warranties.
6. Expiration of the Warranty
Once elapsed the warranty period established by this Manufacturer Conventional Warranty as indicated in
clause 1, any repair and/or replacement intervention shall be at the expenses of the consumer, in line with
the current tari s of the network of authorized After-Sale Service centres.
** Failure to comply with the instructions on use not only is extremely dangerous for your
own safety but it will result in an exclusion of all assistance provided this warranty.
Bekijk gratis de handleiding van Sangiorgio Slim-HS714-T, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Sangiorgio |
| Model | Slim-HS714-T |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 6924 MB |
