Sangiorgio Slim-HS714-T handleiding
Handleiding
Je bekijkt pagina 36 van 44
36
EMPTYING PROCEDURE
1) Place a tray between the cabinet and the
end of the lter.
Figure 18
!
Warning! After a wash cycle
with high temperature, wait until it is
cooled down. Danger of burning.
2) Loosen the lter using the appropriate
holder in order to let the water ow.
Figure 19
When there is no more water coming out,
unscrew the lter completely and clean it
carefully. Remove any foreign objects from the
lter.
Figure 20
Reinsert the drain lter and tighten it rmly
until it locks.
!
Warning! If you do not rein-
sert the fi lter or you do not screw it
until it is blocked, the water will come
out of the machine.
CLEANING OF ELECTRO-VALVE AND
WATER SUPPLY HOSE FILTERS
To clean the lters follow the instructions
below:
• Turn o the washing machine and
disconnect the power cable.
• Close the water and disconnect the
water supply inlet hose from the water
tap and from the washing machine.
• Get pair of tweezers and a tooth brush.
• Remove the lters from their place
( gure 21)
• Clean the lters with running water
making use of the tooth brush.
WATER LOADING TEST
1. Get a stopwatch;
2. Turn the programme knob to drain and
let it run for about two minutes;
3. Turn the programme knob to cotton
programme simultaneously start the
programme and the stopwatch;
4. From the moment the washing machine
drum starts turning, make sure the
stopwatch does not exceed 80-90
seconds;
5. If that value exceeds, it is necessary
to ensure the right grid pressure and
check that the water supply hose lter
and/or solenoid valve hose lter are not
obstructed.
Bekijk gratis de handleiding van Sangiorgio Slim-HS714-T, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Sangiorgio |
| Model | Slim-HS714-T |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 6924 MB |
