Samsung WD90DG5G34BE handleiding
Handleiding
Je bekijkt pagina 22 van 140
English22
Problem Action
Stops.
• Plug the power cord into a live electrical outlet.
• Check the fuse or reset the circuit breaker.
• Close the door and press the Start/Pause button to start the washing machine.
For your safety, the washing machine will not tumble or spin unless the door is
closed.
• Before the washing machine starts to fill, it will make a series of clicking noises
to check the door lock and does a quick drain.
• There may be a pause or soak period in the cycle. Wait briefly and the washing
machine may start.
• Make sure the mesh filter of the water supply hose at the water taps are not
clogged. Periodically clean the mesh filter.
• If the washing machine is not supplied with sufficient power, the washing
machine temporarily will not drain or spin. As soon as the washing machine
regains sufficient power, it will operate normally.
Fills with the wrong water
temperature.
• Fully open both taps.
• Make sure the temperature selection is correct.
• Make sure the hoses are connected to the correct taps. Flush water lines.
• Make sure the water heater is set to supply a minimum 120 °F (49 °C) hot water
at the tap. Also, check the water heater capacity and recovery rate.
• Disconnect the hoses and clean the mesh filter. The mesh filter may be clogged.
• While the washing machine fills, the water temperature may change as the
automatic temperature control feature checks incoming water temperature.
This is normal.
• While the washing machine fills, you may notice just hot and/or just cold water
going through the dispenser when cold or warm temperatures are selected.
This is a normal function of the automatic temperature control feature as the
washing machine determines the water temperature.
Load is wet at the end of
a cycle.
• Use the High or Extra High spin speed.
• Use high efficiency (HE) detergent to reduce oversudsing.
• Load is too small. Small loads (one or two items) may become unbalanced and
not spin completely.
• Make sure the drain hose is not kinked or clogged.
Leaks water.
• Make sure the door is properly closed.
• Make sure all hose connections are tight.
• Make sure the end of the drain hose is correctly inserted and secured to the
drain system.
• Avoid overloading.
• Use high efficiency (HE) detergent to prevent oversudsing.
• Check if there is something stuck between the door and the diaphragm.
‐ If there is something stuck between the door and the diaphragm, it may
cause a leak or damage to the diaphragm.
DC68-04525H-00_IB_SU Big-PJT_COMBO-MD_EN(EE).indd 22DC68-04525H-00_IB_SU Big-PJT_COMBO-MD_EN(EE).indd 22 2024/12/13 10:23:092024/12/13 10:23:09
Bekijk gratis de handleiding van Samsung WD90DG5G34BE, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Samsung |
| Model | WD90DG5G34BE |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 14759 MB |
