Samsung WD90DG5G34BE handleiding
Handleiding
Je bekijkt pagina 16 van 140
English16
NOTE
• Before doing your laundry for the first time, you must run a complete wash cycle without any items in the drum.
• If the display does not respond to control inputs. Remove the sticker.
• Make sure the laundry is fully inserted in the drum and not caught in the door.
Initial settings
Run Calibration (recommended)
Calibration ensures accurate weight detection by the washing machine. Make sure the drum is empty before running
Calibration.
1. Power off, and then power on the washing machine.
2. Press and hold Temp. and Delay End simultaneously for 3 seconds to enter Calibration mode. The “Cb”
message appears.
3. Press Start/Pause to run the Calibration cycle.
4. The drum will rotate clockwise and counter-clockwise for about 3 minutes.
5. When the cycle is complete, “0” appears on the display and the washing machine will turn off automatically.
6. The washing machine is now ready for use.
Manual dispenser
Prewash
compartment
Main-wash
compartment
Softener
compartment
A
1. Prewash compartment: Add prewash detergent.
2. Main-wash compartment: Add main-wash
detergent, water softener, soaking detergent,
bleach, and/or stain removers.
3. Softener compartment: Put in additives such as
fabric softener. Do not exceed the max line (A).
DC68-04525H-00_IB_SU Big-PJT_COMBO-MD_EN(EE).indd 16DC68-04525H-00_IB_SU Big-PJT_COMBO-MD_EN(EE).indd 16 2024/12/13 10:23:072024/12/13 10:23:07
Bekijk gratis de handleiding van Samsung WD90DG5G34BE, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Samsung |
| Model | WD90DG5G34BE |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 14759 MB |
