Samsung WA80F10S2C handleiding
Handleiding
Je bekijkt pagina 8 van 24
English8
Position the drain hose
General type
1. Press and hold down the joint ring, and insert it into the drain hose.
2. Insert the drain hose into the drain outlet. Make sure to connect them firmly
using the joint ring. The drain hose is extensible. Adjust the length of the drain
hose as needed.
A
Pump type (Applicable models only)
1. Open the hose cap (A), and insert the drain hose. Tighten the drain hose using
the joint ring.
NOTE
• The position (side or rear) of the drain outlet depends on the model.
• Availability of the hose cap depends on the model.
2. Connect the other end of the drain hose to a standpipe or basin that is
positioned 90-100 cm (*) from the floor.
WARNING
Make sure the end of the drain hose is not submerged by water. Otherwise, the
washing machine may suffer serious damage.
CAUTION
• Do not exceed 3 m (*) for the total length of extended hoses.
• Do not let the drain hose run over doorsills that protrude 5 cm (**) or more
from the floor.
CAUTION
Do not run the drain hose under the bottom of the machine.
Power on
Plug the power cord into a wall socket protected by a fuse or circuit breaker. Then, press Power to turn on the washing machine.
DC68-04387G-00_IB_COMMON-AUTOWASHER_EN.indd 8DC68-04387G-00_IB_COMMON-AUTOWASHER_EN.indd 8 2025-02-25 3:23:172025-02-25 3:23:17
Bekijk gratis de handleiding van Samsung WA80F10S2C, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Samsung |
| Model | WA80F10S2C |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3483 MB |
