Samsung WA51DG5505AW handleiding
Handleiding
Je bekijkt pagina 63 van 72
English 63
Code Meaning
PC
When position of the clutch can't be detected.
• Turn off the washer, unplug it, wait one minute, and then plug the washer in
again. If the information code remains, contact a Samsung customer service
center.
PC1
After position of the clutch is detected, if the signal from the clutch hall is incorrect.
• Turn off the washer, unplug it, wait one minute, and then plug the washer in
again. If the information code remains, contact a Samsung customer service
center.
Ub
Spinning does not work.
• Make sure laundry is spread out evenly.
• Make sure the washing machine is on a flat, stable surface.
• Redistribute the load. If only one item of clothing needs washing, such as a
bathrobe or pair of jeans, the final spin result might be unsatisfactory, and a
“Ub” check message will appear in the display.
Ur
Display for additional rinsing.
• Appears when additional rinsing cycle senses that tub is unbalanced.
• Press any button/key to release the display.
8C
Check the MEMS sensor.
• Power the washer off. Wait 2-3 minutes, power the washer on, and then try
again.
• If the problem continues, call for service.
dn
Firmware update is in progress through SmartThings.
• To use the product, wait about 30 minutes until the firmware update completes.
(The time required to complete the firmware update may vary depending on
your Internet connection.)
• This code will remain on the display, regardless of power on and off, until the
firmware update is complete.
For any codes not listed above, call 1-800-726-7864 (1-800-SAMSUNG).
Untitled-3 63 2023-11-02 12:34:13
Bekijk gratis de handleiding van Samsung WA51DG5505AW, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Samsung |
| Model | WA51DG5505AW |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 6310 MB |
