Handleiding
Je bekijkt pagina 32 van 43
32
Support
2nd Description
Self Diagnosis Perform this test when you experience a problem with your
monitor's picture.
―
Never turn off the power nor change the input source during self
diagnosis. If possible, try not to interrupt testing.
Software Update Update software using an update file on a USB device.
1
Save the update file (in .img format) that you downloaded from
the Samsung website (http://www.samsung.com) to a USB
device.
2
Connect the USB device to the port on the monitor.
Select → Support → Software Update.
3
Follow the instructions on the screen to proceed with update.
4
Your product will turn itself off and on again automatically after
completing update, and then turn off your product.
5
Remove the power cord from the power outlet and then
reconnect the cord after turning off.
―
S22D40*G / S24D40*G / S27D40*G models only.
―
To perform software update by using a USB device, first format the
USB device to FAT32.
―
When updating by a USB device, be sure to use the device whose
version of USB 3.0 or lower.
―
When performing update, make sure that only one IMG file (.img) is
saved in the root directory.
―
If the No USB devices detected. Please check and try again. message
is displayed, this is probably due to the following reasons.
2nd Description
Software Update
―
A USB device is not connected to the
port.
―
The files in the connected USB device are not compatible formats.
―
There are no valid update files found in the connected USB device.
(There are no update files saved in the memory or the file names
are incorrect.)
―
The update will not start if the downloaded software does not
match the software installed on the monitor. To check the software
for consistency, select
→ Support → Information.
―
Do not turn off the product until the update is complete. And prevent
the updating from any interruption as far as possible. In general, the
product returns to the previous version if an update is interrupted.
―
It may change the screen color or blink during USB update, but it is
not a monitor problem. Since S/W update is performed normally,
please wait until the update is finished.
Register Product Discover how to register your product.
―
S22D40*G / S24D40*G / S27D40*G models only.
Information View the current software information. Refer to the actual monitor
screen.
Reset All Return all the settings for the product to the default factory
settings.
Bekijk gratis de handleiding van Samsung S27D300GAN, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Samsung |
| Model | S27D300GAN |
| Categorie | Monitor |
| Taal | Nederlands |
| Grootte | 3795 MB |
