Handleiding
Je bekijkt pagina 12 van 43
12
S22D40*G / S24D40*G / S27D40*G
-3.0° (±2.0°) ~ 25.0° (±2.0°) 105.0 mm (±5.0 mm)
• The product tilt and height can be adjusted.
• Hold the top center of the product and adjust the height carefully.
• When adjusting the stand height, you may hear a noise. This noise is generated because of the
ball inside the stand slides when the stand height is adjusted. It is a normal noise and not a
malfunction of the product.
Caution
• Grasp the left and right sides of the monitor and adjust the swivel.
• Grasp the center of the monitor and adjust the height.
• Do NOT hold the stand moving part with your hand when leveling the screen. Your hand may get
hurt.
• Do not put an object around the lower part of the product. The product or object may get damaged
when adjusting the product height.
• Do not arbitrarily remove the panel film. If not observed, the warranty service may be restricted.
If the screen is not level, take the following actions.
• Hold the bezel at both side edges and adjust the monitor angle until the screen becomes level.
(Be careful not to directly hold the LCD display.)
• The monitor angle can be adjusted from -3° to +3°. (S22D30*G / S24D30*G / S27D30*G models
only.)
Bekijk gratis de handleiding van Samsung S22D402GAN, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Samsung |
| Model | S22D402GAN |
| Categorie | Monitor |
| Taal | Nederlands |
| Grootte | 3795 MB |
