Handleiding
Je bekijkt pagina 24 van 28
24 English
SmartThings app
SmartThings app
Connecting the SmartThings app
to your product
1.
Selecting the product that you want to
connect.
1) Start the SmartThings app about one
minute after turning on the hood.
2) After the SmartThings app is started,
select "ADD NOW" when a pop-up
window saying that a product is found
appears.
A new device has been found.
Add this device to SmartThings?
Don’t add Later Add now
Select
3) If the pop-up window does not appear,
select "+," and then "Add Device."
Home
Living room
Select
Home
Add device
Living room
Select
You can add a product you want to connect
to by selecting it manually or by selecting
"Scan."
• Select manually: Range Hood >
Samsung
• Scan: [Range Hood] Samsung
Home
Living room
Select
By device type
Range Hood
Select
2.
Connecting the SmartThings app to
your product
• Follow the instructions displayed on
the SmartThings app to connect to
your product.
• For information on how to use the
SmartThings app, select the How To
menu in the app.
NOTE
• If any pop-up-window appears on
the top of the smartphone while
connecting to your product, do not
select it.
• If a pop-up window saying that the
device is already registered appears
while connecting to your product,
get permission using "REQUEST
PERMISSION" from a user already
connected to the product, or create
a new account using "REGISTER MY
ACCOUNT" to independently connect
to the product.
• If a Samsung account-related country
error occurs while connecting to
your product, log out of your current
Samsung account, log in to your
previous Samsung account, and then
delete all devices that have been
previously connected. Then, log in to
your current Samsung account again
and configure the settings.
• If a failure message appears while
adding a device, see "Setting up
and connecting to a Wi-Fi access
point using your smartphone" on
page 23. The connection may fail
temporarily due to an installation
location problem with the access
point or other problems.
• If the word "AP" does not disappear
from the display, unplug the power
and plug it in again.
• For the security protocols for
wireless/wired access points,
WPA-PSK and WPA2-PSK are
recommended. For the authentication
method, AES is recommended. New
Wi-Fi authentication specifications
and non-standard WiFi authentication
methods are not supported.
• The product supports the IEEE802.11
b/g/n (2.4 GHz) communication
protocol. (Samsung recommends
IEEE802.11n.)
• If your Internet service provider has
permanently registered the MAC
address (a unique identification
number) of your PC or modem, you
may not be able to connect your
product to the Internet. Contact your
Internet service provider and ask how
to connect devices other than your
PC (such as a Range Hood) to the
Internet.
Open Source Announcement
The software included in this product
contains open source software. You
may obtain the complete corresponding
source code for a period of three years
after the last shipment of this product by
contacting our support team via http://
opensource.samsung.com (please use the
"Inquiry" menu).
It is also possible to obtain the complete
corresponding source code in a physical
medium, such as CD-ROM. A minimal
payment will be required.
The following URL http://opensource.
samsung.com/opensource/SMART_
AT_051/seq/0 leads to the open source
license information as related to this
product. This offer is valid to anyone in
receipt of this information.
Bekijk gratis de handleiding van Samsung NK36CB665W, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Samsung |
| Model | NK36CB665W |
| Categorie | Afzuigkap |
| Taal | Nederlands |
| Grootte | 3811 MB |
