Handleiding
Je bekijkt pagina 30 van 35
Cleaning and maintenance
1
2
3
4
5
6
7
29 _ Cleaning and maintenance
Burners
Remove the burner lids and Flame Spreaders by puling them upwards and away
from the top plate.
Soak them in hot water and a little detergent or washing up liquid.
After cleaning and washing them, wipe and dry them carefully. Make sure that
the flame holes are clean and completely dry.
Wipe the fixed parts of the burner cup with a damp cloth and dry afterwards.
Gently wipe the ignition device and flame supervision device with a well
wrung-out cloth and wipe dry with a clean cloth.
Before placing the burners back on the top plate, make sure that the injector is
not blocked.
Re-assemble the Auxiliary,Semi-Rapid, Rapid and
Triple-Crown burners as follows :
1. Place the flame spreader ( 4 ) on to the burner cup ( 5 ) so that the ignition device and the flame
supervision device extend through their respective holes in the flame spreader.
The fame spreader must click into place correctly.
2. Position the burner lid ( 1, 2, 3 ) onto the flame speader ( 4 ) so that the retaining pins fit into
their respective recesses.
Replace parts in the correct order after cleaning.
- Do not mix up the top and bottom.
- The locating pins must fit exactly into the notches.
1
2
3
4
5
6
7
Bekijk gratis de handleiding van Samsung NA75D3030AS, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Samsung |
| Model | NA75D3030AS |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 3342 MB |
