Handleiding
Je bekijkt pagina 23 van 58
Gas conversion
1
injector in place.
2
Injector
Control handle
Tap
Sealing ring
Tap
6
-
-
-
Adjustment of minimum level of the flame
Turn the taps down to minimum.
Remove the control hands from taps.
Adjusting by pass screw
For converting ‘natural’ gas G20 into ‘liquid’
gas G30 the screw must be screws down
fully tight
For converting back from G30 into G20, please
rotate the screw in opposite direction to adjust
the minimum level
Finally check the flame does not go out when
quickly turning the tap from the maximum position
to the minimum position.
Install the control handles on the taps.
G20/20mbar
220-240V
50-60Hz,Pmax 1W
G20 20mbar
G30/29mbar G31/37mbar GB Cat.:
II 2H3
+
Qn G20: G30: G31:
S/N:
/
Model:
Built-in Gas Hob
■ Do not completely remove the valve set screw
from the valve stem. The valve set screw is an
integral part of the gas valve assembly. Removing
the valve set screw will cause gas to leak.
Installation Of Appliance
0359DP00129
0359-25
Installation Of Appliance_ 22
Bekijk gratis de handleiding van Samsung NA64D3110AS, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Samsung |
| Model | NA64D3110AS |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 5919 MB |
