Handleiding
Je bekijkt pagina 21 van 58
Installing the appliance
of the screws.There are one set of screw holes in each
corner of the hob(H).
Slightly tighten a screw(C) through the bracket(B) so
that the bracket is attached to the hob, but so that you
can still adjust the position
.
2. Carefully turn the hob back over and then gently lower it
into the aperture hole that you have cut out.
3. On the underneath of the hob, adjust the brackets into a
position that is suitable for your worktop.
Then fully tighten the screws(C) to secure the hob into
position.
(A) SEALING STRIP
(C) SCREW (B) BRACKET
H
H
H
H
appliance upside down and place it on a
cushioned mat.
supervision devices are not damaged in this
operation.
eht dnuora dedivorp egnops eht ylppA .2
edge of the appliance.
3. Do not leave a gap in the sealing agent or
overlap the thickness.
Sp
on
g
e
Bottom view
(Stainless steel model) (Glass model)
The thickness of the sponge in stainless model is 1.5mm
The thickness of the sponge in glass model is 3.0mm
(A)The width of the sponge is 10mm
(B)The width of the sponge is 20mm
(A)
(B)
(B)
(A)
Installation Of Appliance
Installation Of Appliance_ 20
Bekijk gratis de handleiding van Samsung NA64D3110AS, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Samsung |
| Model | NA64D3110AS |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 5919 MB |
