Handleiding
Je bekijkt pagina 10 van 96
Preparing the installation
English10
Cabinet
24" (610 mm) minimum
24" (610 mm)
minimum
34⅛-35⅓" (867-897 mm)
Installation requirements
Compatibility check
If you are replacing an old dishwasher, you must check the existing dishwasher connections for
compatibility with the new dishwasher. Replace the existing connections if necessary.
Electrical
• United States: Install according to the National Electric Code, as well as state, municipal, or local codes.
• Canada: Install according to the Canadian Electric Code C22.1 (latest edition), as well as the provincial,
municipal, or local codes.
• For direct cable connections:
- Use flexible, armored, or non-metallic sheathed copper wire with a ground that meets the wiring
requirements of your local codes and ordinances.
WARNING
• Do NOT use an extension cord.
• Use only the power cord that comes with the dishwasher.
• Do NOT connect the ground wire to plastic plumbing, gas lines, or hot water pipes.
• Improperly connected grounding conductors may cause electric shock.
Water supply
• Pressure: Ensure the hot water supply line pressure is between 20–120 psi (140–830 kPa).
• Water temperature: Set the water heater to supply water between 120 °F (49 °C) and 149 °F (65 °C)
- This range provides the best washing results and shortens cycle time.
- The water temperature should not exceed 149 °F (65 °C) to avoid damaging the dishes.
Untitled-11 10Untitled-11 10 2024-12-09 4:27:302024-12-09 4:27:30
Bekijk gratis de handleiding van Samsung DW90F89P0US, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Samsung |
| Model | DW90F89P0US |
| Categorie | Wasdroger |
| Taal | Nederlands |
| Grootte | 9799 MB |
