Samsung AR18HSFSEWKNMG handleiding
Handleiding
Je bekijkt pagina 23 van 58
This function will reduce the energy usage while the air conditioner is operating in Cool/Heat mode.
When the air conditioner is operating in Cool/Heat mode;
Remote controller display
1. Press the Options button.
2. Press the button until (Single user) indicator starts to blink.
3. Press the SET button to set the Single user function.
- (Single user) will blink rst, then remain on the display as (Single user). Then
will be displayed on the set temperature indicator part for few
seconds and Single user function will begin.
- When the Single user function is on, vertical air swing will turn on automatically.
- If the current set temperature is lower than 24°C in Cool mode, it will be
automatically raised to 24 °C.
Cancel
f Press the Options button again to make the (Single user) indicator
blink and press the SET button.
• Single user function is only available in Cool/Heat mode.
• If the Single user function is selected while Fast/Comfort function is
on, corresponding function will be cancelled.
• Vertical air swing will remain on even after the Single user function is
cancelled.
Additional options available in Single user function
You can adjust the set temperature by 1 °C within the range of 24 °C ~ 30 °C in Cool mode and 16 °C ~ 30 °C
in Heat mode.
(Auto), (Low), (Med), (High), (Turbo) can be selected.
Vertical air swing can be selected.
Using the Single user function
English-23
OPTIONS04
A3050 MG Model IB&IM_DB68-04542A_HP_EN.indd 23 2014/4/1 11:48:59
Bekijk gratis de handleiding van Samsung AR18HSFSEWKNMG, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Samsung |
| Model | AR18HSFSEWKNMG |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 8747 MB |
