Samsung AR18BY3YBWKNNA handleiding

Airco

Samsung

32 pagina's

PDF beschikbaar

Handleiding

English

AppendixAppendix

Troubleshooting

Problem Solution

The air conditioner stops

working.

• Make sure the unit is receiving power.

• Check the circuit breaker. If it is flipped off, flip it on again and restart the

unit. If the problem persists, contact your service provider.

• The Timed off function may have turned off the unit. Turn on the unit again.

Cannot change the

temperature.

• Check if the unit is in Fan or Fast mode. If so, you cannot change the set

temperature; the unit automatically controls the set temperature.

Improper airflow temperature.

• Check the set temperature. In Cool mode, cooling occurs only

when the set temperature is lower than the current temperature.

• Use

the (Temperature) button

on the remote control to change

the set temperature.

• Check if the air filter is blocked with dirt or debris. If the air filter

is blocked, the cooling performance may decrease. Clean the air

filter regularly (page 28).

• Check if the outdoor unit is covered or is installed near obstacles.

Remove the coverings and obstacles.

• Check if doors or windows are open. This may cause poor

circulation or performance. Close all doors and windows.

• Check if the pipe length between the units exceeds the maximum

pipe length (see “Typical installation” in the Installation manual). If

so, the cooling performance may decrease.

Cannot change the airflow

direction.

• Check if the good'sleep function is on in Cool mode. If so, you

cannot control the airflow direction.

Cannot change the fan speed.

• Check if the unit is in Auto, Dry, or Fast mode or the good'sleep

function is on in Cool mode. In these conditions, you cannot control

the fan speed; the unit automatically controls the fan speed.

The remote control does not

work.

• Replace the batteries in the remote control.

• Make sure the remote control can send an unobstructed signal to the unit.

• Keep bright lights away from the unit. Light from fluorescent bulbs or

neon signs may interrupt the signal from the remote control.

The Timed on/off function

does not work.

• Make sure to press the

(SET) button on the remote control

when setting the timer.

If the air conditioner is not operating normally, refer to the troubleshooting guide below.

Appendix

RAC084-00_IB_22Y AR9500T SIEL GEO Wind 2way_TL_EN_.indd 29RAC084-00_IB_22Y AR9500T SIEL GEO Wind 2way_TL_EN_.indd 29 2021-11-02 오후 4:13:062021-11-02 오후 4:13:06

Bekijk gratis de handleiding van Samsung AR18BY3YBWKNNA, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.