Handleiding
Je bekijkt pagina 12 van 84
●
●
●
●
no display
(horizontal louvers
stops at current position)
●
button
●
●
●
button
“
、
、
" may not be available. When air condi-
tioner receives this signal, the air conditioner will blow
fan automatically.
●
●
●
TIMER ON button
Press "TIMER ON" to confirm it. The word "ON"
will stop blinking. " " icon resumes displaying.
Cancel TIMER ON: Under the condition that
TIMER ON is started up, press "TIMER ON"
button to cancel it.
TIMER OFF button
"TIMER OFF" button can set the time for timer
off. After pressing this button, " "icon disap-
pears and the word "OFF" on remote controller
blinks. Pr ess Press "+" or "-" button to adjust
TIMER OFF setting. After each pressing "+" or
"-" button, TIMER OFF setting will incr ease or
decrease 1min. Holding "+" or "-" button, 2s
later,
the time will change quickly until reaching
your required time.
Press "TIMER OFF" and the word "OFF" will
stop blinking. " " icon resumes displaying.
Under the condition that TIMER OFF is started
up, press "TIMER OFF" button to cancel it.
Clock time adopts 24-hour mode.
The in terval b etween two operations can
't exceed 5s.
Otherwise, remote controller will quit setting status.
Operation for TIMER ON/TIMER OFF is the same.
button/
When selectin
g " ", air conditioner is blowing
air automatically. Horizontal louver will automat-
ically swing up & down at maximum angle.
When selecting 、 、 air condition-
er is blowing air at fixed position. Horizontal
louver will stop at the fixed position.
When selecting "
、
、
", air conditioner is
blowing air at fixed angle. Horizontal louver will
send air at the fixed angle.
Hold " "button above 2s to set your required
swing angle. When reaching your required
angle, release the button.
Press this button to set clock time. " " icon on
remote controller will blink. Press "+" or "-" button
within 5s to set clock time. Each pressing of "+" or
"-" button, clock time will increase or decrease 1
minute. If hold "+" or "-" button, 2s later, time will
change quickly. Release this button when reaching
your required time. Press "CLOCK" button to
confirm the time. " " icon stops blinking.
X-FAN
CLOCK
TIMER ON
Press this button under cool and dry mode to start
up X-FAN function, and " " icon on remote control-
ler will be displayed. Press this button again to
cancel
X-FAN
function, and " " icon will disappear.
TIMER OFF
button
TURBO
When X-FAN function is on, if the air conditioner is
turned off, indoor fan will still operate at low speed
for a while to blow the residual water inside the air
duct.
During
X-FAN
operation, press X-FAN button to tur n
off
X-FAN
function. Indoor fan will stop operation
immediately.
Under cool or heat mo de, press this button to turn
to quick cool or quick h eat mode. " " icon is
displayed on remote controller. Press this button
●
●
●
Under on and off status, you can set TIMER OFF or
TIMER ON simultaneously.
Before setting TIMER ON or TIMER OFF, please
adjust the clock time.
After starting up TIMER ON
or TIMER OFF, set the
constant circulating valid. After that, air conditioner
will be turned on or turned off according to setting
time. ON/OFF button has no effect on setting. If you
don 't need this function, please use remote control-
ler to cancel it.
"TIMER ON" button can set the time for timer
on. After pressing this button, " " icon disap-
pears and the word "ON" on rem ote controller
blinks. Press "+" or "-" button to adjust TIMER
ON setting. After each pressing"+" or "-" button.
TIMER ON setting will increase or decrease
1min. Holding "+" or "-" button, 2s later, the time
will change quickly until reaching your required
time.
NOTE
NOTE
NOTE
NOTE
9
Bekijk gratis de handleiding van Samsung AR18BVHGAWK, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Samsung |
| Model | AR18BVHGAWK |
| Categorie | Airco |
| Taal | Nederlands |
| Grootte | 13892 MB |
