Handleiding
Je bekijkt pagina 27 van 52
English-27
INSTALLATION
05
Installing the unit
IMPORTANT:
When installing the unit, always remember to connect first the refrigerant tubes, then the electrical lines.
Always disassemble the electric lines before the refrigerant tubes.
Upon receipt, inspect the product to verify that it has not been damaged during transport. If the product
appears damaged, DO NOT INSTALL it and immediately report the damage to the carrier or retailer (if the
installer or the authorized technician has collected the material from the retailer.)
After completing the installation, always carry out a functional test and provide the instructions on how to
operate the air conditioner to the user.
Do not use the air conditioner in environments with hazardous substances or close to equipment that release
free flames to avoid the occurrence of fires, explosions or injuries.
To help prevent injury when accidentally touching the indoor unit fan, install the indoor unit at least 2.5 m
above the floor.
The air conditioner should be used only for the applications for which it has been designed : the indoor unit is
not suitable to be installed in areas used for laundry.
Do not install the product in a place where thermohygrostat is needed (such as server room, machinery room,
computer room, etc.) Those places do not provide guaranteed operation condition of the product therefore
performance can be poor in these places.
Do not install the product in a ship or a vehicle (such as a campervan). Salt, vibration or other environmental
factor may cause the product malfunction, electric shock or fire.
Our units must be installed in compliance with the spaces indicated in the installation manual to ensure either
accessibility from both sides or ability to perform routine maintenance and repairs. The units’ components
must be accessible and that can be disassembled in conditions of complete safety either for people or things.
For this reason, where it is not observed as indicated into the Installation Manual, the cost necessary to reach
and repair the unit (in safety, as required by current regulations in force) with slings, trucks, scaffolding or any
other means of elevation won’t be considered in-warranty and charged to end user.
Power supply line, fuse or circuit breaker
Always make sure that the power supply is compliant with current safety standards. Always install the air
conditioner in compliance with current local safety standards.
Always verify that a suitable grounding connection is available.
Verify that the voltage and frequency of the power supply comply with the specifications and that the installed
power is sufficient to ensure the operation of any other domestic appliance connected to the same electric
lines.
Always verify that the cut-off and protection switches are suitably dimensioned.
Verify that the air conditioner is connected to the power supply in accordance with the instructions provided in
the wiring diagram included in the manual.
Always verify that electric connections (cable entry, section of leads, protections…) are compliant with the
electric specifications and with the instructions provided in the wiring scheme.
Always verify that all connections comply with the standards applicable to the installation of air conditioners.
Be sure not to perform power cable modification, extension wiring, and multiple wire connection.
- It may cause electric shock or fire due to poor connection, poor insulation, or current limit override.
- When extension wiring is required due to power line damage, refer to "How to connect your extended
power cables" in the installation manual.
RAC TCL ODM 아프리카향 IBIM_EN_Ver.1.0.indd 27 2019-04-08 오후 1:24:07
Bekijk gratis de handleiding van Samsung AR12RRFLFWK, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Samsung |
| Model | AR12RRFLFWK |
| Categorie | Airco |
| Taal | Nederlands |
| Grootte | 5411 MB |
